Rubber waterstop FLOWSTOP 20 x 5 mm

article number 010040

Rubber waterstop FLOWSTOP

test of durability CE Water pressure test Tested quality

For sealing construction joints and penetrations in concrete structures.

With a proven ability to withstand a pressure of 8 bar, FLOWSTOP satisfies the conditions of the German WU directive on water-impermeable concrete structures for a continuous pressure of 2 bar, as well as international standards that require high pressure resistance.

  • General Building Supervisory Test Certificate
  • Suitable for zones with frequently varying water levels
  • Good chemical resistance
  • Dimensionally stable
  • Maximum pressure of 8 bar with size 20 x 5 mm
  • Long-term testing for more than 250 days
  • Easy installation with the POWER swelling tape adhesive
  • No foundation curb required

available in large quantities

Add to notice list

The most important information at a glance

switch_to_language DE
switch_to_language GB
switch_to_language FR
switch_to_language NL
switch_to_language IT
switch_to_language ES
switch_to_language CZ
switch_to_language PL
switch_to_language RO
switch_to_language DK
switch_to_language SE
switch_to_language NO
switch_to_language FI
switch_to_language RS
switch_to_language RU
switch_to_language GR
switch_to_language TR

Go to Youtube

article number:
010040
GTIN:
4251689510212
customs tariff number:
39169050
packing unit:
Cart
sales quantity unit:
120 m
weight per:
Cart = 18 kg
material:

TPE

colour:
red
surface:

smooth

hardness:

40 - 50 Shore A DIN 53505-A

elongation:

up to 300% DIN 53571

increase in volume:

up to 600%, in neutral water (ph7)

up to 100 %, in salt water

test certificate/ approval:

Test report (abP)
MFPA Leipzig
Nr.: P-SAC 02 / 5.1 / 13-515

Test report acid resistance
MPA Braunschweig
(1200/442/15d)-Pan of 28.10.2015

suitable for zones with frequently varying water levels:

yes

corresponds to:

 Utility class A for the wear classes 1 and
 2 in accordance with the WU guideline

resistant to:

e.g.

  • Diluted acids and alkalis
  • Salt water
  • Methane gas
  • Radon
  • Liquid manure and slurry
  • Fermentation mash and biogas
  • Concrete alkalinity
  • Mineral oils
  • Fuels (Petrol, Diesel, Kerosine)
packaging:
6 rolls à 20 m
120 m per carton

36 cartons par palette

thermal scope of application:
approx. -30°C up to +60°C
waterpressuretightness:
up to max. 8 bar ( 80m water column )
storage:
Store in undamaged and unopened original packaging in a dry place out of direct sunlight.
disposal:
Can be disposed of at municipal waste landfill sites, taking into account the local waste disposal regulations.
Dimensions:
20 x 5 mm

Only the system-compatible POWER swelling tape adhesive is suitable for installation.
FLOWSTOP High-pressure swelling tape must not be installed using swellingtape grid!


The substrate must be clean, dry, and free ofloose particles. Apply the POWER swelling tape adhesive in a uniform bead (width 8-10 mm) out of the cartrige onto the surface.


Once the POWER swelling tape adhesive has been applied in the centre of the joint, the FLOWSTOP High-pressure swelling tape is placed on the adhesive and gently pressed on, moving it slightly back and forth, crosswise to the longitudinal axis. When the tape is fixed, the adhesive should slightly ooze out on both sides. This guarantees a complete fixation.


A concrete cover of 8cm must be ensured. FLOWSTOP High-pressure swelling tape must always be installed inside a two-sided connection reinforcement.


Both, straight and angle joints need to be butt jointed. The joint areas must be form-fit in order to avoid any discontinuity in the system.

 

Angle joint


Straight butt joint


FLOWSTOP in precast wall

Download DWG

Download PDF

FLOWSTOP in in-situ concrete

Download DWG

Download PDF

POWER SWELLING TAPE ADHESIVE installation situation flowstop

Download DWG

Download PDF

Accessories

suitable accessories

POWER swelling tape adhesive

Cartridge 310 ml high-pressure adhesive 1 cartridge = approx. 8 m   single-component solvent-free sealant for bonding of M...

Contact us

We are happy to answer your questions

Please enter name
please_enter_company
please_enter_city
Please enter email
Please enter subject
Please enter message

Please fill the following captcha to reduce spam.

Please enter captcha.

We are not allowed to get in touch if you do not agree with our data privacy statement.