Crack-inducing profile for cavity walls
article number 070278
MASTER Joint sheet metal SFG/ SFE/ FE and SRF
coated crack inducing profile
incl. 2 fixing clips
with perforated support rail and
perforated foldable retaining plates
tested by MFPA Leipzig
Add to notice listThe most important information at a glance
St 37, galvanized
special coating: polymer resin fabric-reinforced
2.50 m
160 mm
2.00 m
30 mm each
Approx. 0.6 mm
cavity walls up to 400 mm
Approx. 0.15 mm
Approx. 0.9 mm
Test report PB 5.1/14-425-2
MFPA Leipzig
Yes
Utility class A for the wear classes 1 and
2 in accordance with the WU guideline
No
Yes
original packaging in a dry place out of direct sunlight.
Installation cavity walls
The cavity wall element is positioned with VB joint sheet metal acting as the foundation/wall waterproofing element.
The SRF profile is set vertically and overlapped with the joint sheet metal (overlap ≥ 5 cm).
The adjustable mounting brackets are adjusted to fix them on the face of the cavity wall.
The wall formwork is drilled in order to fix the mounting bracket.
The mounting bracket is fixed with a drive-in plug.
(No nail plugs included we recommend nail-plug 5 x 40 mm)
The overlapping area on the floor/wall joint sheet metal is secured with two fixing clips.
Installation of the SRF profile is complete; the next cavity wall element can be placed.
Installation in-situ concrete
The in-situ concrete element is positioned with VB joint sheet metal acting as the foundation/wall waterproofing element.
The SFG profile is set vertically and overlapped with the joint sheet metal (overlap ≥ 5 cm).
Use the foldable, perforated retaining plates to fix the SRF profile to the reinforcement.
The overlapping area on the floor/wall joint sheet metal is secured with two fixing clips.
Installation of the SRF profile is complete; the next in-situ concrete wall element can be placed.
Status: 23.03.2022
Similar products
You can find similar products here.
for triple walls incl. 5 nail plugs 5 / 50 and 4 fixing clips with adjustable bracket for wall thickness 25 - 40 cm General Build...
for the corner area incl. 5 nail plugs 5 / 50 and 4 fixing clips with adjustable bracket for wall thickness 25 - 40 cm pressure w...
coated crack inducer profile for In-situ concrete wall type incl. 2 fixing clips Tested by MFPA Leipzig ...
Contact us
We are happy to answer your questions