z bentonitu sodného
číslo článku 010025
MASTERSTOP SK je samolepiaca bentonitová napučiavacia páska, ktorá pri kontakte s vodou expanduje a zabraňuje prenikaniu vody.
Použitie
- Vodopriepustné zabudovanie potrubia do betónových konštrukcií
- Tesnenie spojov výstuže
- Tesnenie podlahových vpustí
Najdôležitejšie informácie na prvý pohľad
Bentonit sodný
Hladký
plastové
20 x 5 mm
až do 140 % , v normálnej vode (PH 7)
Nie
Ja
MFPA Lipsko
Ja
Triedu A použite pre triedy zaťaženia 1 a 2 v súlade s usmernením WU
Rozmery 20 x 5 mm
Kartón 90 m
Rolky po 18 m
36 škatúľ na palete
MASTERSTOP SK profiles are always installed inside the reinforcement. In doing so, sufficient concrete cover must be ensured.
The concrete cover should be at least 6 cm as otherwise the high swelling pressure of the bentonite may damage the concrete.
Pull off silicone paper and affix 2 rings of MASTERSTOP SK around the pipe to be waterproofed.
The rings must be at least 5 cm apart.
Butt joint ends, no overlaps.
The surface of the pipes must be rigid.
MASTERSTOP SK adheres to metal, plastic, PVC and stone.
Secure MASTERSTOP SK with binding wire if necessary.
MASTERSTOP bentonite swelling tape must only be processed when dry in dry weather conditions.
The geometry described must not be modified. Swelling tapes must not be installed if their rectangular geometry has been modified, or if they have become soiled or damaged!
Swelling tapes that have already expanded must not be installed!
Swelling tapes that have been installed and have expanded before placement of the concrete must be replaced!
Status: 23.03.2022
Kontaktujte nás
Radi vám odpovieme na vaše otázky