Τύπος Στάνταρ (S)
αριθμός άρθρου 070362
Κατηγορία στοιχείου κλείστρου με σύμπλεξη
Υψηλές απαιτήσεις τίθενται στην τεχνολογία στεγανοποίησης όταν πρόκειται για στεγανοποίηση αρμών μανδάλωσης ή κατασκευαστικών αρμών.
Τα πλήρως επικαλυμμένα στοιχεία ξυλότυπου ABS εξασφαλίζουν την ασφαλή και μόνιμη στεγανοποίηση των αρμών κύκλου και σκυροδέτησης έναντι πιεστικού και μη πιεστικού νερού.
Το απαιτούμενο ύψος τοποθέτησης πρέπει να προσδιορίζεται κατά την παραγγελία, προκειμένου να επιτευχθεί το καλύτερο δυνατό αποτέλεσμα.
Προσθήκη στη λίστα ειδοποιήσεωνΟι πιο σημαντικές πληροφορίες με μια ματιά
St 37, γαλβανισμένο
Ειδική επίστρωση: πολυμερές πλαστικό ενισχυμένο με ύφασμα
2,50 m
160 mm
160 mm
Περίπου 0,6 mm
Περίπου 0,15 mm
Περίπου 0,9 mm
Ευρωπαϊκή τεχνική αξιολόγηση
Γερμανικό Ινστιτούτο Οικοδομικής Τεχνολογίας (DIBt), Βερολίνο
Πιστοποιητικό δοκιμής της Γενικής Επιθεώρησης Δόμησης
MFPA Leipzig
ja
Χρησιμοποιήστε την κατηγορία A για την κατηγορία φορτίου 1 και 2 σύμφωνα με την οδηγία WU
Σε παλέτες μίας χρήσης,
Διατίθεται μεμονωμένα, με δύο κρουστικούς σφιγκτήρες/στοιχείο
Όχι
Ja
![© Mastertec GmbH & Co.KG © Mastertec GmbH & Co.KG](/Einbauanleitungen/WG2/Abschalelement%20ABS/6592/image-thumb__6592__textandimagecombi/Bild,P201.99b5c73d.jpg.pagespeed.ce.xgrELCnC0k.jpg)
The stopend panel joint sheet metal ABS is positioned between the lower and upper reinforcement layer (foundation – foundation area) or the outer and inner reinforcement layer (wall – wall area).
The perforated plate is fastened to the reinforcement using binding wire.
The individual elements can be pushed into one another, they must overlap by at least 7 cm and the joint must be secured with two fixing clips.
With higher constructional element thicknesses, the stopend panel joint sheet metal ABS must also be stiffened in order to be structurally load-bearing.
![© Mastertec GmbH &Co. KG © Mastertec GmbH &Co. KG](/Einbauanleitungen/WG2/Abschalelement%20ABS/6590/image-thumb__6590__textandimagecombi/Bild,P202.597602f4.jpg.pagespeed.ce.6_QVIQAyjZ.jpg)
Before the segment is concreted, the protective foil must be removed from the joint sheet metal.
The protective foil in the section not to be concreted remains on the joint sheet metal.
Once the shuttering for the concrete segment is complete, the segment can be concreted.
The area around the stopend panel joint sheet metal ABS must be carefully waterproofed to ensure that the joint sheet metal is fully embedded in the concrete on all sides.
Cavities behind the perforated plate must be avoided.
![© Mastertec GmbH & Co. KG © Mastertec GmbH & Co. KG](/Einbauanleitungen/WG2/Abschalelement%20ABS/6593/image-thumb__6593__textandimagecombi/Bild,P203.df3cf792.jpg.pagespeed.ce.CnQ_QXRGPz.jpg)
In the second concrete segment, as soon as the protective foil has been removed immediately before concreting, concrete can be placed directly against the stopend panel joint sheet metal ABS.
In this case, the concrete must also be carefully waterproofed in the area of the stopend panel joint sheet metal ABS.
Shrink holes or reinforcement shadow must not form around the joint sheet metal.
The distance between the "installation dimension E" reinforcement is decisive when ordering the stopend panel joint sheet metal ABS
Status: 23.03.2022
Αξεσουάρ
κατάλληλα αξεσουάρ
Παρόμοια προϊόντα
Μπορείτε να βρείτε παρόμοια προϊόντα εδώ.
Κατηγορία στοιχείου κλείστρου ακατέργαστου αρμού Κατά τη σφράγιση των αρμών κύκλου ή κατασκευών, οι απαιτήσεις από την τεχνολογία ...
Επικοινωνήστε μαζί μας
Θα χαρούμε να απαντήσουμε στις ερωτήσεις σας