Valmistettu korkealaatuisesta TPE:stä
artikkelin numero 010045
Betonirakenteiden saumojen ja läpivientien tiivistämiseen
.Testatun 8 barin painekestävyyden ansiosta FLOWSTOP täyttää saksalaisen WU-ohjeen vaatimukset 2 barin jatkuvalle paineelle sekä kansainväliset standardit, jotka edellyttävät korkeaa painekestävyyttä.
Korkeaa painekestävyyttä.- Yleinen rakennusviraston testaustodistus
- Sopii vedenvaihtovyöhykkeille
- Hyvä kemiallinen kestävyys
- Mittakaavaltaan vakaa
- Maksimipaine 8 bar, mitat 20 x 5 mm
- Pitkäkestoinen testaus yli 250 päivää
- Helppo asennus POWER-turvotusnauhaliiman avulla
- Ei vaadi pystytystä
Tärkeimmät tiedot yhdellä silmäyksellä
Modifioitu TPE
Smooth
40 - 50 Shore A DIN 53505-A
Jopa 300% DIN 53571
jopa 600 %, normaalissa vedessä (pH 7)
jopa 100 % suolaisessa vedessä
Yleinen rakennusvalvonnan koetodistus (abP)
MFPA Leipzig
Nro: P-SAC 02 / 5.1 / 13-515
Euroopan tekninen arviointi
ETA-18/0304
päivätty 18. kesäkuuta 2018
JGS-testi
MPA Braunschweig
(1200/442/15d)-Pan päivätty 28.10.2015
Ja
Käyttöluokka A kuormitusluokkiin 1 ja 2 WU-ohjeen mukaisesti
Esimerkiksi
Laimennetut hapot ja emäkset
Merivesi
Metaanikaasu
Radon
Betonin emäksisyys
Mineraaliöljyt
Polttoaineet (bensiini, diesel, parafiini)
Kartonki á 60 m
6 rullaa, 10 m kukin
36 kartonkia kuormalavalla
![](/Einbauanleitungen/WG1/Flowstop/19981/image-thumb__19981__textandimagecombi/Schnecke,P2BKleber.292dfbd0.png.pagespeed.ce.k-X0GzfFPE.png)
Only the system-compatible POWER swelling tape adhesive is suitable for installation.
FLOWSTOP High-pressure swelling tape must not be installed using swellingtape grid!
![](/Einbauanleitungen/WG1/Flowstop/19978/image-thumb__19978__textandimagecombi/FLOWSTOP,P2BKleber.a47676a5.jpg.pagespeed.ce.ZRwef46q7n.jpg)
The substrate must be clean, dry, and free ofloose particles. Apply the POWER swelling tape adhesive in a uniform bead (width 8-10 mm) out of the cartrige onto the surface.
![](/Einbauanleitungen/WG1/Flowstop/19980/image-thumb__19980__textandimagecombi/Aufbringen,P20FLOWSTOP.4e45bb00.jpg.pagespeed.ce.TZ5ON2PL-L.jpg)
Once the POWER swelling tape adhesive has been applied in the centre of the joint, the FLOWSTOP High-pressure swelling tape is placed on the adhesive and gently pressed on, moving it slightly back and forth, crosswise to the longitudinal axis. When the tape is fixed, the adhesive should slightly ooze out on both sides. This guarantees a complete fixation.
![](/Einbauanleitungen/WG1/Flowstop/19977/image-thumb__19977__textandimagecombi/Schnecke,P208,P20cm,P20Betondeckung.c4200e54.jpg.pagespeed.ce.VnG-jEK6-j.jpg)
A concrete cover of 8cm must be ensured. FLOWSTOP High-pressure swelling tape must always be installed inside a two-sided connection reinforcement.
![](/Einbauanleitungen/WG1/Flowstop/19982/image-thumb__19982__textandimagecombi/Ecke.16ea8df9.png.pagespeed.ce.UaacYyPtSJ.png)
Both, straight and angle joints need to be butt jointed. The joint areas must be form-fit in order to avoid any discontinuity in the system.
Angle joint
![](/Einbauanleitungen/WG1/Flowstop/19979/image-thumb__19979__textandimagecombi/Stumpfsto,PC3,P9F.d967af45.png.pagespeed.ce.9uBx7lFH9I.png)
Straight butt joint
Status: 23.03.2022
Tarvikkeet
sopivat lisävarusteet
Yksikomponenttinen, liuotinvapaa tiiviste MASTERSTOP- ja FLOWSTOP-turvotusnauhojen liimaamiseen. POWER-versio on korkeapaineliima....
Ota yhteyttä
Vastaamme mielellämme kysymyksiisi