Tyyppi Standard (S)
artikkelin numero 070370
Stopend-paneelit ABS hammastettu
Suljinelementin luokka lukittu liitos
Kierros- tai rakennusliitosten tiivistämistekniikalle asetetaan korkeat vaatimukset.
Täysin pinnoitetut ABS-sulkuelementit varmistavat, että kierros- tai betonointiliitokset tiivistetään tukevasti ja pysyvästi puristavalta ja puristamattomalta vedeltä.
Tilauksen yhteydessä on ilmoitettava tarvittava asennuskorkeus parhaan mahdollisen lopputuloksen saavuttamiseksi.
Lisää ilmoitusluetteloonTärkeimmät tiedot yhdellä silmäyksellä
St 37, sinkitty
Erikoispinnoite: kangasvahvisteinen polymeerimuovi
2,50 m
160 mm
310 - 400 mm
Noin 0,6 mm
Noin 0,15 mm
Noin 0,9 mm
Euroopan tekninen arviointi
Saksan rakennustekniikan instituutti (DIBt), Berliini
Yleisen rakennusvalvonnan koetodistus
MFPA Leipzig
ja
Käytä luokkaa A kuormitusluokkiin 1 ja 2 WU-ohjeen mukaisesti
Kertakäyttöisillä kuormalavoilla,
Saatavana yksittäin, sis. kaksi iskupuristinta/elementti
Ei
Ja
![© Mastertec GmbH & Co.KG © Mastertec GmbH & Co.KG](/Einbauanleitungen/WG2/Abschalelement%20ABS/6592/image-thumb__6592__textandimagecombi/Bild,P201.99b5c73d.jpg.pagespeed.ce.xgrELCnC0k.jpg)
The stopend panel joint sheet metal ABS is positioned between the lower and upper reinforcement layer (foundation – foundation area) or the outer and inner reinforcement layer (wall – wall area).
The perforated plate is fastened to the reinforcement using binding wire.
The individual elements can be pushed into one another, they must overlap by at least 7 cm and the joint must be secured with two fixing clips.
With higher constructional element thicknesses, the stopend panel joint sheet metal ABS must also be stiffened in order to be structurally load-bearing.
![© Mastertec GmbH &Co. KG © Mastertec GmbH &Co. KG](/Einbauanleitungen/WG2/Abschalelement%20ABS/6590/image-thumb__6590__textandimagecombi/Bild,P202.597602f4.jpg.pagespeed.ce.6_QVIQAyjZ.jpg)
Before the segment is concreted, the protective foil must be removed from the joint sheet metal.
The protective foil in the section not to be concreted remains on the joint sheet metal.
Once the shuttering for the concrete segment is complete, the segment can be concreted.
The area around the stopend panel joint sheet metal ABS must be carefully waterproofed to ensure that the joint sheet metal is fully embedded in the concrete on all sides.
Cavities behind the perforated plate must be avoided.
![© Mastertec GmbH & Co. KG © Mastertec GmbH & Co. KG](/Einbauanleitungen/WG2/Abschalelement%20ABS/6593/image-thumb__6593__textandimagecombi/Bild,P203.df3cf792.jpg.pagespeed.ce.CnQ_QXRGPz.jpg)
In the second concrete segment, as soon as the protective foil has been removed immediately before concreting, concrete can be placed directly against the stopend panel joint sheet metal ABS.
In this case, the concrete must also be carefully waterproofed in the area of the stopend panel joint sheet metal ABS.
Shrink holes or reinforcement shadow must not form around the joint sheet metal.
The distance between the "installation dimension E" reinforcement is decisive when ordering the stopend panel joint sheet metal ABS
Status: 23.03.2022
Tarvikkeet
sopivat lisävarusteet
Samanlaisia tuotteita
Löydät samankaltaisia tuotteita täältä.
Suljinelementin luokka karkea liitos Kierto- tai rakennusliitosten tiivistämisessä tiivistystekniikalle asetetaan korkeat vaatimuk...
Ota yhteyttä
Vastaamme mielellämme kysymyksiisi