Type renforcé (V)
numéro d'article 070362V
Eléments de coffrage ABS - Joints crénelés
Elément de décoffrage catégorie joint denté
L'étanchéité des joints de reprise ou de construction est soumise à des exigences élevées en matière de technique d'étanchéité.
Les éléments de coffrage ABS entièrement revêtus garantissent que les joints de reprise ou de bétonnage sont étanches de manière sûre et durable contre l'eau sous pression et sans pression.
La hauteur de montage nécessaire doit être indiquée lors de la commande afin d'obtenir le meilleur résultat possible.
Vers le formulaire de commande/de demande
Ajouter à la noticeAperçu des informations les plus importantes
St 37, galvanisé
.
Revêtement spécial : Plastique polymère renforcé par un tissu
2,50 m
La sécurité est un élément essentiel de la protection de l'environnement et de la santé publique.
Environ 0,6 mm
Environ 0,15 mm
L'utilisation de l'eau est une question de sécurité.
Environ 0,9 mm
Evaluation technique européenne
.
Institut allemand des techniques de construction (DIBt), Berlin
Certificat général de surveillance des travaux
MFPA Leipzig
ja
Classe d'utilisation A pour les classes de sollicitation 1 et 2 selon la directive WU
.sur palettes à usage unique,
Disponible à l'unité, y compris deux attaches de choc/élément
Non
Ja
Ja
The stopend panel joint sheet metal ABS is positioned between the lower and upper reinforcement layer (foundation – foundation area) or the outer and inner reinforcement layer (wall – wall area).
The perforated plate is fastened to the reinforcement using binding wire.
The individual elements can be pushed into one another, they must overlap by at least 7 cm and the joint must be secured with two fixing clips.
With higher constructional element thicknesses, the stopend panel joint sheet metal ABS must also be stiffened in order to be structurally load-bearing.
Before the segment is concreted, the protective foil must be removed from the joint sheet metal.
The protective foil in the section not to be concreted remains on the joint sheet metal.
Once the shuttering for the concrete segment is complete, the segment can be concreted.
The area around the stopend panel joint sheet metal ABS must be carefully waterproofed to ensure that the joint sheet metal is fully embedded in the concrete on all sides.
Cavities behind the perforated plate must be avoided.
In the second concrete segment, as soon as the protective foil has been removed immediately before concreting, concrete can be placed directly against the stopend panel joint sheet metal ABS.
In this case, the concrete must also be carefully waterproofed in the area of the stopend panel joint sheet metal ABS.
Shrink holes or reinforcement shadow must not form around the joint sheet metal.
The distance between the "installation dimension E" reinforcement is decisive when ordering the stopend panel joint sheet metal ABS
Status: 23.03.2022
Contactez nous
We are happy to answer your questions