Tips Standarta (S)
raksta numurs 070380
Slēgarmatūras elementa kategorijas savienojums ar bloķētu savienojumu
Cilcikla vai būvniecības šuvju blīvēšanai ir izvirzītas augstas prasības blīvēšanas tehnoloģijai.
Pilnībā pārklātie ABS veidņu elementi nodrošina, ka cikla vai betonēšanas šuves ir droši un pastāvīgi noslēgtas pret spiedes un bezspiedes ūdeni.
Lai sasniegtu vislabāko iespējamo rezultātu, pasūtot jānorāda nepieciešamais uzstādīšanas augstums.
Uz pasūtījumu/pieprasījuma formu
Pievienot paziņojumu sarakstamSvarīgākā informācija īsumā
St 37, cinkots
Īpašais pārklājums: ar audumu pastiprināta polimēra plastmasa
2,50 m
160 mm
810 - 900 mm
Apmēram 0,6 mm
Apmēram 0,15 mm
Apmēram 0,9 mm
Eiropas tehniskais novērtējums
Vācijas Būvniecības tehnoloģiju institūts (DIBt), Berlīne
Vispārējās būvinspekcijas pārbaudes sertifikāts
MFPA Leipciga
ja
Izmantojiet A klasi 1. un 2. slodzes klasei saskaņā ar WU vadlīnijām
Uz vienreizlietojamiem paliktņiem,
Pieejams atsevišķi, ieskaitot divas trieciena spailes/elementu
Nē
Ja
![© Mastertec GmbH & Co.KG © Mastertec GmbH & Co.KG](/Einbauanleitungen/WG2/Abschalelement%20ABS/6592/image-thumb__6592__textandimagecombi/Bild,P201.99b5c73d.jpg.pagespeed.ce.xgrELCnC0k.jpg)
The stopend panel joint sheet metal ABS is positioned between the lower and upper reinforcement layer (foundation – foundation area) or the outer and inner reinforcement layer (wall – wall area).
The perforated plate is fastened to the reinforcement using binding wire.
The individual elements can be pushed into one another, they must overlap by at least 7 cm and the joint must be secured with two fixing clips.
With higher constructional element thicknesses, the stopend panel joint sheet metal ABS must also be stiffened in order to be structurally load-bearing.
![© Mastertec GmbH &Co. KG © Mastertec GmbH &Co. KG](/Einbauanleitungen/WG2/Abschalelement%20ABS/6590/image-thumb__6590__textandimagecombi/Bild,P202.597602f4.jpg.pagespeed.ce.6_QVIQAyjZ.jpg)
Before the segment is concreted, the protective foil must be removed from the joint sheet metal.
The protective foil in the section not to be concreted remains on the joint sheet metal.
Once the shuttering for the concrete segment is complete, the segment can be concreted.
The area around the stopend panel joint sheet metal ABS must be carefully waterproofed to ensure that the joint sheet metal is fully embedded in the concrete on all sides.
Cavities behind the perforated plate must be avoided.
![© Mastertec GmbH & Co. KG © Mastertec GmbH & Co. KG](/Einbauanleitungen/WG2/Abschalelement%20ABS/6593/image-thumb__6593__textandimagecombi/Bild,P203.df3cf792.jpg.pagespeed.ce.CnQ_QXRGPz.jpg)
In the second concrete segment, as soon as the protective foil has been removed immediately before concreting, concrete can be placed directly against the stopend panel joint sheet metal ABS.
In this case, the concrete must also be carefully waterproofed in the area of the stopend panel joint sheet metal ABS.
Shrink holes or reinforcement shadow must not form around the joint sheet metal.
The distance between the "installation dimension E" reinforcement is decisive when ordering the stopend panel joint sheet metal ABS
Status: 23.03.2022
Aksesuāri
piemēroti piederumi
Līdzīgi produkti
Līdzīgus produktus var atrast šeit.
Slēgarmatūras elementa kategorijas neapstrādāts savienojums Lai hermetizējot cikliskos vai būvkonstrukciju šuves, blīvēšanas tehno...
Sazinieties ar mums
Mēs labprāt atbildēsim uz jūsu jautājumiem