Tipo reforçado (V)
número do artigo 070366V
Painéis de batente ABS dentado
Elemento de caixilho categoria junta interligada
As altas exigências são colocadas na tecnologia de vedação ao vedar juntas de intertravamento ou de construção.
Os elementos de cofragem em ABS totalmente revestidos asseguram que as juntas de ciclo e de betonagem são seladas de forma segura e permanente contra água de prensagem e não prensagem.
A altura de instalação necessária deve ser especificada ao fazer o pedido, a fim de obter o melhor resultado possível.
Adicionar à lista de avisosAs informações mais importantes num relance
St 37, galvanizado
Revestimento especial: plástico polimérico reforçado com tecido
2,50 m
160 mm
210 - 250 mm
Cerca de 0,6 mm
Cerca de 0,15 mm
Cerca de 0,9 mm
Avaliação Técnica Europeia
Instituto Alemão de Tecnologia da Construção (DIBt), Berlim
Certificado de ensaio da Inspeção Geral da Construção
MFPA Leipzig
ja
Utilizar a classe A para as classes de carga 1 e 2, de acordo com as directrizes da WU
Em paletes descartáveis,
Disponível individualmente, incluindo duas pinças de impacto/elemento
Não
Ja
![© Mastertec GmbH & Co.KG © Mastertec GmbH & Co.KG](/Einbauanleitungen/WG2/Abschalelement%20ABS/6592/image-thumb__6592__textandimagecombi/Bild,P201.99b5c73d.jpg.pagespeed.ce.xgrELCnC0k.jpg)
The stopend panel joint sheet metal ABS is positioned between the lower and upper reinforcement layer (foundation – foundation area) or the outer and inner reinforcement layer (wall – wall area).
The perforated plate is fastened to the reinforcement using binding wire.
The individual elements can be pushed into one another, they must overlap by at least 7 cm and the joint must be secured with two fixing clips.
With higher constructional element thicknesses, the stopend panel joint sheet metal ABS must also be stiffened in order to be structurally load-bearing.
![© Mastertec GmbH &Co. KG © Mastertec GmbH &Co. KG](/Einbauanleitungen/WG2/Abschalelement%20ABS/6590/image-thumb__6590__textandimagecombi/Bild,P202.597602f4.jpg.pagespeed.ce.6_QVIQAyjZ.jpg)
Before the segment is concreted, the protective foil must be removed from the joint sheet metal.
The protective foil in the section not to be concreted remains on the joint sheet metal.
Once the shuttering for the concrete segment is complete, the segment can be concreted.
The area around the stopend panel joint sheet metal ABS must be carefully waterproofed to ensure that the joint sheet metal is fully embedded in the concrete on all sides.
Cavities behind the perforated plate must be avoided.
![© Mastertec GmbH & Co. KG © Mastertec GmbH & Co. KG](/Einbauanleitungen/WG2/Abschalelement%20ABS/6593/image-thumb__6593__textandimagecombi/Bild,P203.df3cf792.jpg.pagespeed.ce.CnQ_QXRGPz.jpg)
In the second concrete segment, as soon as the protective foil has been removed immediately before concreting, concrete can be placed directly against the stopend panel joint sheet metal ABS.
In this case, the concrete must also be carefully waterproofed in the area of the stopend panel joint sheet metal ABS.
Shrink holes or reinforcement shadow must not form around the joint sheet metal.
The distance between the "installation dimension E" reinforcement is decisive when ordering the stopend panel joint sheet metal ABS
Status: 23.03.2022
Contactar-nos
Teremos todo o gosto em responder às suas perguntas