Tip Standard (S)
numărul articolului 070376
Categoria de elemente de cofraj cu îmbinare întrepătrunsă
>La etanșarea rosturilor de ciclu sau de construcție se impun cerințe ridicate în ceea ce privește tehnologia de etanșare.
Elementele de cofraj ABS complet acoperite asigură etanșarea sigură și permanentă a rosturilor de ciclu sau de betonare împotriva apei presante și nepresante.
Înălțimea de instalare necesară trebuie specificată la comandă pentru a obține cel mai bun rezultat posibil.
La formularul de comandă/întrebare
>. Adăugați la lista de notificareCele mai importante informații dintr-o singură privire
St 37, galvanizat
.
Acoperire specială: plastic polimeric ranforsat cu țesătură
2,50 m
160 mm
610 - 700 mm
Aproximativ 0,6 mm
Aproximativ 0,15 mm
Aproximativ 0,9 mm
Evaluare tehnică europeană
.
Institutul german pentru tehnologia construcțiilor (DIBt), Berlin
.
Certificatul de testare al Inspectoratului general pentru construcții
.
MFPA Leipzig
.
ja
Utilizați clasa A pentru clasele de încărcare 1 și 2, în conformitate cu ghidul WU
.
Pe paleți de unică folosință,
.
Disponibil individual, inclusiv două cleme de impact/element
Nu
Ja
![© Mastertec GmbH & Co.KG © Mastertec GmbH & Co.KG](/Einbauanleitungen/WG2/Abschalelement%20ABS/6592/image-thumb__6592__textandimagecombi/Bild,P201.99b5c73d.jpg.pagespeed.ce.xgrELCnC0k.jpg)
The stopend panel joint sheet metal ABS is positioned between the lower and upper reinforcement layer (foundation – foundation area) or the outer and inner reinforcement layer (wall – wall area).
The perforated plate is fastened to the reinforcement using binding wire.
The individual elements can be pushed into one another, they must overlap by at least 7 cm and the joint must be secured with two fixing clips.
With higher constructional element thicknesses, the stopend panel joint sheet metal ABS must also be stiffened in order to be structurally load-bearing.
![© Mastertec GmbH &Co. KG © Mastertec GmbH &Co. KG](/Einbauanleitungen/WG2/Abschalelement%20ABS/6590/image-thumb__6590__textandimagecombi/Bild,P202.597602f4.jpg.pagespeed.ce.6_QVIQAyjZ.jpg)
Before the segment is concreted, the protective foil must be removed from the joint sheet metal.
The protective foil in the section not to be concreted remains on the joint sheet metal.
Once the shuttering for the concrete segment is complete, the segment can be concreted.
The area around the stopend panel joint sheet metal ABS must be carefully waterproofed to ensure that the joint sheet metal is fully embedded in the concrete on all sides.
Cavities behind the perforated plate must be avoided.
![© Mastertec GmbH & Co. KG © Mastertec GmbH & Co. KG](/Einbauanleitungen/WG2/Abschalelement%20ABS/6593/image-thumb__6593__textandimagecombi/Bild,P203.df3cf792.jpg.pagespeed.ce.CnQ_QXRGPz.jpg)
In the second concrete segment, as soon as the protective foil has been removed immediately before concreting, concrete can be placed directly against the stopend panel joint sheet metal ABS.
In this case, the concrete must also be carefully waterproofed in the area of the stopend panel joint sheet metal ABS.
Shrink holes or reinforcement shadow must not form around the joint sheet metal.
The distance between the "installation dimension E" reinforcement is decisive when ordering the stopend panel joint sheet metal ABS
Status: 23.03.2022
Accesorii
accesorii adecvate
Produse similare
Puteți găsi produse similare aici.
Categoria elementului de protecție categoria îmbinare brută> La etanșarea rosturilor de ciclu sau de construcție, se impun ceri...
Contactați-ne
Suntem bucuroși să vă răspundem la întrebări