angleščina
s tehnologijo čebulnega obroča - deljena zasnova
številka izdelka 120171T
Najpomembnejše informacije na prvi pogled
Tesnilni element: okolju prijazna guma EPDM
Širina tesnila: 40 mm
Tlačne plošče, vijaki, matice: V2A
Tiskarske plošče: srebrne barve
M6
10 mm
5 Nm (dimenzijsko stabilne cevi za medije)
150 mm
Brez notranjega vtiča: 62 - 64 mm
Prvi obroč: 74 - 76 mm
2. Obroč: 88 - 90 mm
3. obroč: 108 - 110 mm
Adjust the sealing insert of the MASTER-Ring Multi split version to the diameter of the media line. To do this, push the required rings backwards through the seal.
Remove the locking clip of the MASTER-Ring Multi split version
Open the gasket on the side of the puzzle pieces.
Place the MASTER-Ring Multi split version around the installed pipe.
Close the gasket and reinstall the locking clip and close it as well.
Push the seal into the annular gap.
Tighten the screws crosswise through one turn.
Tighten the screws to the specified max. torque. (Ø 100/150/200 = 5Nm; Ø250 = 10Nm).
Check the torque after 1-2 hours and retighten the screws if necessary.
Pišite nam
Z veseljem bomo odgovorili na vaša vprašanja