makale numarası 010030
Poliüretan bazlı şişirme macunu, inşaat derzlerinin ve penetrasyonların sızdırmazlığı için, 310 ml kartuş
Bildirim listesine ekleBir bakışta en önemli bilgiler
Poliüretan kauçuk
hamurumsu, kararlı
yaklaşık 360 ml/m yapı derzi
yaklaşık 80 - 100 ml/m Penetrasyon
approx. 6 - 7 mm / 24 hrs. at + 20 °C
Yaklaşık %180
20 +/-5
İnşaat derzleri:
Genel bina yetkilisi test sertifikası
P-SAC 02 / 5.1/ 17 -310 (MFPA Leipzig)
Penetrasyonlar:
Test raporu
PB 5.1 / 17-315-1 (MFPA Leipzig)
12 kartuş 310ml / karton
Beton, çelik, taş, sert PVC, vb.
!!! Polipropilen için uygun değildir !!!
Kuru ve nemli yüzeyler için
üretimden sonra min. 9 ay
Preparatory work:
Cutting the cartridge tips:
The use of MasterMastic PU swelling paste for construction joints or wall penetrations requires different quantities of applied material.
The area of applied material is regulated by the discharge aperture.
The nozzle is cut off to suit the various areas of application.
The following aperture sizes are necessary:
Ø 5-6 mm: Adhesive joints, e.g. swelling tapes
Ø 8-10 mm: Penetrations
Ø 13-15 mm: Construction joints
The combination of the discharge aperture and the usage volume which you can find in the technical datasheet results in the required area of application in order to guarantee professional sealing.
Sealing of penetrations:
MasterMastic PU is applied before installation of the penetration into the formwork.
The installation of the penetration into the formwork starts after complete curing of the MasterMastic PU swelling paste.
It must be ensured that the bead of MasterMastic PU is inside the two reinforcements with a concrete cover of 8 cm.
Since MasterMastic PU is a swelling paste it must be treated like a swelling tape and be protected from rain.
Sealing of construction joints:
After cutting off the nozzle to the necessary discharge aperture MasterMastic PU can be applied to the clean substrate.
Apply MasterMastic PU with a consistent pressure and a consistent line speed.
The concreting of the building component can only start after complete curing of the MasterMastic PU.
It must be ensured that the bead of MasterMastic PU is inside the two reinforcements with a concrete cover of 8 cm.
Since MasterMastic PU is a swelling paste it must be treated like a swelling tape and be protected from rain.
Status: 23.03.2022
Bize ulaşın
Sorularınızı yanıtlamaktan mutluluk duyarız