z bentonitu sodného
číslo článku 010012
MASTERSTOP "LONG TIME" bentonitová napučiavacia páska na bezpečné utesnenie stavebných škár a priestupov v betónových konštrukciách proti prenikaniu vody. Vnikaniu vody zabraňuje napučiavanie a napučiavací tlak, ktorý vzniká počas napučiavania.
MASTERSTOP LONG TIME bentonitová napučiavacia páska je tesnenie, ktoré môže vo vode napučať. Pozostáva z jemne mletého, vysoko napučiavajúceho ílového minerálu (bentonitu sodného), vloženého ako spojivo do matrice z nevulkanizovanej gumy. Pre lepšiu odolnosť voči poveternostným vplyvom je potiahnuté filmom, ktorý sa v betóne sám rozpúšťa. Pridať do zoznamu upozorneníNajdôležitejšie informácie na prvý pohľad
Bentonit sodný
Hladký
plastové
Až 340 % v normálnej vode (PH 7)
až 150 % v kvapalinách, ktoré silne napádajú betón
až 290 % v alkalických kvapalinách
Nie
Ja
Nie
Ja
ETA - 16 / 0735
Osvedčenie o skúške všeobecného stavebného úradu (AbP), MFPA Lipsko
Číslo: P-SAC 02 / 5.1 / 15-253
cca 10 dní
vykonáva sa približne 6-7 dní po betonáži
Ja
Triedu A použite pre triedy zaťaženia 1 a 2 v súlade s usmernením WU
Since the MASTERSTOP "LONG TIME" is supplied with a protective sheating, the swelling tape can
only be fastened by using a special swelling tape grid.
The substrate must be clean, dry and free of loose parts.
Apply the MASTERSTOP "LONG TIME" in the middle of the joint to the concrete surface and fix it.
The later concrete cover must be at least 8cm.
The swelling tape must be bordered by reinforcement on both sides.
Minimum distance to the reinforcement: 5cm.
Place the swelling tape grid carefully over the swelling tape without damaging the protective sheating.
The grid must only be nailed on through the side wings.
Fasten with suitable nails either by hand or mechanically with a bolt-firing tool.
The distance between nails should not exceed 25 cm in the longitudinal direction of the swelling tape.
At the beginning of the tape and if tape sections are used, pull back the protective sheating approx. 5 cm, cut off the swelling tape and fold over the extra length of sheating to prevent contact with water.
In the corners, the swelling tape grid must be released in order to ensure a continuous firm fixation on the substrate.
In the case of butt joints in the straight line and the use of swelling tape grids, the joints of swelling tape and swelling tape grid should always be made in a staggered position.
Status: 23.03.2022
Príslušenstvo
vhodné príslušenstvo
Mriežka na opasok pre MASTERSTOP "LONG TIME" 25/20, dĺžka 1 m ...
Dĺžka 42 mm s veľkým kotúčom ...
Dĺžka 40 mm s diskom ...
Podobné produkty
Podobné produkty nájdete tu.
Toto je test...
Kontaktujte nás
Radi vám odpovieme na vaše otázky