inglise
sibularõngastehnoloogiaga - jagatud versioon
Artikli number 120193T
Kõige olulisem teave lühidalt
Tihenduselement: keskkonnasõbralik EPDM kummi
Tihendi laius: 40 mm
Rõhuplaadid, kruvid, mutrid: V2A
Trükiplaadid: hõbedane
M6
10 mm
5 Nm (mõõtmete poolest stabiilsed meediumitorud)
200 mm
Ilma sisemise pistikuta: 108 - 110 mm
1. ring: 123 - 125 mm
2. Ring: 138 - 140 mm
1. ring: 138 - 140 mm
3. ring: 158 - 160 mm
Adjust the sealing insert of the MASTER-Ring Multi split version to the diameter of the media line. To do this, push the required rings backwards through the seal.
Remove the locking clip of the MASTER-Ring Multi split version
Open the gasket on the side of the puzzle pieces.
Place the MASTER-Ring Multi split version around the installed pipe.
Close the gasket and reinstall the locking clip and close it as well.
Push the seal into the annular gap.
Tighten the screws crosswise through one turn.
Tighten the screws to the specified max. torque. (Ø 100/150/200 = 5Nm; Ø250 = 10Nm).
Check the torque after 1-2 hours and retighten the screws if necessary.
Võtke meiega ühendust
Vastame hea meelega teie küsimustele