con tecnologia onion ring - versione split
numero di articolo 120193T
Le informazioni più importanti in un colpo d'occhio
Elemento di tenuta: gomma EPDM ecocompatibile
Larghezza della guarnizione: 40 mm
Piastre di pressione, viti, dadi: V2A
Piastre di stampa: argentate
M6
10 mm
5 Nm (tubi di supporto dimensionalmente stabili)
200 mm
Senza tappo interno: 108 - 110 mm
1º anello: 123 - 125 mm
2. Anello: 138 - 140 mm
3° anello: 158 - 160 mm
![](/Einbauanleitungen/WG4/MASTER-Ringe/MASTER-Ring%20Multi%20-%20geteilt/57829/image-thumb__57829__textandimagecombi/Zuschnitt.f5c130c1.png.pagespeed.ce.zHOsrNrj8A.png)
Adjust the sealing insert of the MASTER-Ring Multi split version to the diameter of the media line. To do this, push the required rings backwards through the seal.
![](/Einbauanleitungen/WG4/MASTER-Ringe/MASTER-Ring%20Multi%20-%20geteilt/57827/image-thumb__57827__textandimagecombi/B,PC3,PBCgel_ab.c8fd9d21.png.pagespeed.ce.xHeSD0E4RL.png)
Remove the locking clip of the MASTER-Ring Multi split version
![](/Einbauanleitungen/WG4/MASTER-Ringe/MASTER-Ring%20Multi%20-%20geteilt/57828/image-thumb__57828__textandimagecombi/,PC3,P96ffnen.7f11206e.png.pagespeed.ce.qYFXOJR8JZ.png)
Open the gasket on the side of the puzzle pieces.
![](/Einbauanleitungen/WG4/MASTER-Ringe/MASTER-Ring%20Multi%20-%20geteilt/57826/image-thumb__57826__textandimagecombi/Anbringen.188cfee8.png.pagespeed.ce.O6UsqYgTUo.png)
Place the MASTER-Ring Multi split version around the installed pipe.
![](/Einbauanleitungen/WG4/MASTER-Ringe/MASTER-Ring%20Multi%20-%20geteilt/57825/image-thumb__57825__textandimagecombi/Schlie,PC3,P9Fen.7a6f3038.png.pagespeed.ce.F8vp65aGvA.png)
Close the gasket and reinstall the locking clip and close it as well.
Push the seal into the annular gap.
![](/Einbauanleitungen/WG4/MASTER-Ringe/MASTER-Ring%20Multi%20-%20geteilt/57824/image-thumb__57824__textandimagecombi/Festziehen.e987d23b.png)
Tighten the screws crosswise through one turn.
![](/Einbauanleitungen/WG4/MASTER-Ringe/MASTER-Ring%20Multi%20-%20geteilt/57830/image-thumb__57830__textandimagecombi/Drehmoment.436ad101.png)
Tighten the screws to the specified max. torque. (Ø 100/150/200 = 5Nm; Ø250 = 10Nm).
Check the torque after 1-2 hours and retighten the screws if necessary.
Contattateci
Siamo lieti di rispondere alle vostre domande