no nātrija bentonīta
raksta numurs 010017
Produkta apraksts
MASTERSTOP bentonīta uzbriestošās lentes ir gadiem ilgi pārbaudītas būvniecības praksē, tās uzbriest saskarē ar ūdeni un droši un pastāvīgi hermetizē plaisas vai konstrukcijas šuves.
MASTERSTOP bentonīta uzbriestošo lentu priekšrocības ir pārliecinošas
- viegla un droša uzstādīšana
- Neizmanto veidgabalus un šuves
- Neizmanto statņus
- Svīšanas un saraušanās process ir atgriezenisks
- Samazgriešanās efekts Dimensiju stabilitāte un nelipīgums
- Pūstošās lentes iekļūst plaisās un dobumos
- Neizdala atkritumus vai atlikumus
- Draudzīgas videi
- Drošas, pateicoties plašajai testēšanai
Svarīgākā informācija īsumā
Nātrija bentonīts ar gumijas saturu
Gluds
plastmasas
līdz 240 % normālā ūdenī (PH 7)
līdz 120 % šķidrumos ar spēcīgu betona iedarbību
līdz 220 % sārmainos šķidrumos
Nē
Ja
Piemēram
Līmes kopumā
Urīnviela
Šķidrie kūtsmēsli un virca
Biogāze
Radons
Atkausēšanas sāls
Fermentācijas vielas
Kompostēšanas procesā radušās vielas
Notekūdeņi no notekūdeņu attīrīšanas iekārtām
Papildu pretestības pēc pieprasījuma
Izmērs 20 x 10 mm
Iepakojums 54 m
9 ruļļi pa 6 m katrā
36 kastes uz paletes
![](/Einbauanleitungen/WG1/Masterstop/19989/image-thumb__19989__textandimagecombi/Quellbandkleber,P20auftragen.276442af.jpg.pagespeed.ce.y6zSh5l9IL.jpg)
Installation with swelling tape adhesive:
The substrate must be clean, dry, and free of loose particles.
Apply the swelling tape adhesive in the centre of the joint in a uniform bead (width 8-10 mm) out of the cartridge onto the surface.
The subsequent concrete covering must be at least 8 cm on all sides.
![](/Einbauanleitungen/WG1/Masterstop/19991/image-thumb__19991__textandimagecombi/MASTERSTOP,P20in,P20KLeber,P20eindr,PC3,PBCcken.72e39493.jpg.pagespeed.ce.Ux6_OnHNAz.jpg)
Once the swelling tape adhesive has been applied in the centre of the joint, the MASTERSTOP bentonite swelling tape is placed on the adhesive and gently pressed on, moving it slightly back and forth, crosswise to the longitudinal axis.
When the tape is fixed, the adhesive should slightly ooze out on both sides.
This guarantees a complete fixation.
Ready for use after 4 – 6 hours (depending on weather conditions)
![](/Einbauanleitungen/WG1/Masterstop/19988/image-thumb__19988__textandimagecombi/Verleg.,P20MASTERSTOP.be4d5857.jpg.pagespeed.ce.dOpA4urUAu.jpg)
Installation with swelling tape grid:
The substrate must be clean, dry, and free of loose particles.
Place the MASTERSTOP bentonite swelling tape in the centre of the joint.
The subsequent concrete covering should be at least 8 cm on all sides.
![](/Einbauanleitungen/WG1/Masterstop/19990/image-thumb__19990__textandimagecombi/Nagel,P20in,P20Gitter.f1dd7850.jpg.pagespeed.ce.FQapYqeStC.jpg)
Position the swelling tape correctly.
Push the fixing grid firmly onto the MASTERSTOP bentonite swelling tape.
Fasten using corresponding nails and either by hand or mechanically using a bolt-firing tool.
The distance between nails must not exceed 20 cm in the longitudinal direction of the swelling tape.
![](/Einbauanleitungen/WG1/Masterstop/19993/image-thumb__19993__textandimagecombi/Ecke,P20MASTERSTOP,P20mit,P20Kleber.8c4470c4.png.pagespeed.ce.MKB21R0_8l.png)
Both, straight and angle joints need to be butt jointed.
The joint areas must be form-fit in order to avoid any discontinuity in the system.
![](/Einbauanleitungen/WG1/Masterstop/19992/image-thumb__19992__textandimagecombi/Gitter,P20auf,P20MASTERSTOP.2bec18f1.jpg.pagespeed.ce.z7K3mJsi_N.jpg)
In the case of butt joints in the straight line and the use of swelling tape grids, the joints of swelling tape and swelling tape grid should be offset.
Status: 23.03.2022
Aksesuāri
piemēroti piederumi
Vienkomponenta, bez šķīdinātāja, hermētiķis MASTERSTOP bentonīta uzbriestošo lentu līmēšanai. Patēriņš: 40 - 50 ml/m ...
Sazinieties ar mums
Mēs labprāt atbildēsim uz jūsu jautājumiem