iz natrijevega bentonita
številka izdelka 010017
Opis izdelka
Bentonitni nabrekljivi trakovi MASTERSTOP so že leta preizkušeni v gradbeni praksi, ob stiku z vodo nabreknejo ter varno in trajno zatesnijo razpoke ali gradbene spoje.
Prednosti bentonitnih nabrekljivih trakov MASTERSTOP so prepričljive
- enostavna in varna namestitev
- Brez oblikovanih delov in zvarov
- Ni stojal
- Proces nabrekanja in krčenja je reverzibilen
- Učinek samovbrizgavanja Dimenzijsko stabilen in nelepljiv
- Napihljivi trakovi prodirajo v razpoke in votline
- Ni odpadkov ali preostalih kosov
- Okolju prijazno
- Varen zaradi obsežnega testiranja
Najpomembnejše informacije na prvi pogled
Natrijev bentonit z vsebnostjo kavčuka
Gladko
plastik
Do 240 % v običajni vodi (PH 7)
do 120 % v tekočinah z močnim vplivom na beton
do 220 % v alkalnih tekočinah
Ne
Ja
Na primer
liki na splošno
sečnina
Tekoči gnoj in gnojevka
bioplin
Radon
Sol za odstranjevanje ledu
Snovi iz fermentacije
Snovi iz kompostiranja
Odpadne vode v čistilnih napravah
Dodatne odpornosti na zahtevo
Merilo 20 x 10 mm
Karton 54 m
9 zvitkov po 6 m
36 škatel na paleti
Installation with swelling tape adhesive:
The substrate must be clean, dry, and free of loose particles.
Apply the swelling tape adhesive in the centre of the joint in a uniform bead (width 8-10 mm) out of the cartridge onto the surface.
The subsequent concrete covering must be at least 8 cm on all sides.
Once the swelling tape adhesive has been applied in the centre of the joint, the MASTERSTOP bentonite swelling tape is placed on the adhesive and gently pressed on, moving it slightly back and forth, crosswise to the longitudinal axis.
When the tape is fixed, the adhesive should slightly ooze out on both sides.
This guarantees a complete fixation.
Ready for use after 4 – 6 hours (depending on weather conditions)
Installation with swelling tape grid:
The substrate must be clean, dry, and free of loose particles.
Place the MASTERSTOP bentonite swelling tape in the centre of the joint.
The subsequent concrete covering should be at least 8 cm on all sides.
Position the swelling tape correctly.
Push the fixing grid firmly onto the MASTERSTOP bentonite swelling tape.
Fasten using corresponding nails and either by hand or mechanically using a bolt-firing tool.
The distance between nails must not exceed 20 cm in the longitudinal direction of the swelling tape.
Both, straight and angle joints need to be butt jointed.
The joint areas must be form-fit in order to avoid any discontinuity in the system.
In the case of butt joints in the straight line and the use of swelling tape grids, the joints of swelling tape and swelling tape grid should be offset.
Status: 23.03.2022
Dodatki
primerna dodatna oprema
Jednosestavinska tesnilna masa brez topil za lepljenje bentonitnih nabrekljivih trakov MASTERSTOP. Potrošnja: 40-50 ml/m ...
Pišite nam
Z veseljem bomo odgovorili na vaša vprašanja