από μπεντονίτη νατρίου
αριθμός άρθρου 010020
Περιγραφή προϊόντος
Οι ταινίες διόγκωσης μπεντονίτη MASTERSTOP έχουν δοκιμαστεί στην κατασκευαστική πρακτική εδώ και χρόνια, διογκώνονται σε επαφή με το νερό και σφραγίζουν τις ρωγμές ή τους αρμούς κατασκευής με ασφάλεια και μόνιμα.
Οι δοκιμές εξασφαλίζουν ότι το προϊόν είναι κατάλληλο για τους διάφορους τομείς εφαρμογής.
- Εύκολη και ασφαλής εγκατάσταση
- Δεν υπάρχουν χυτά μέρη και συγκολλήσεις
- Χωρίς ορθοστάτες
- Η διαδικασία διόγκωσης και συρρίκνωσης είναι αναστρέψιμη
- Ενέργεια αυτοεγχύσεως Διαστασιολογικά σταθερό και μη κολλώδες
- Οι ταινίες διόγκωσης διεισδύουν σε ρωγμές και κοιλότητες
- Δεν υπάρχουν απόβλητα ή υπολείμματα
- Φιλική προς το περιβάλλον
- Ασφαλής χάρη σε εκτεταμένες δοκιμές
Οι πιο σημαντικές πληροφορίες με μια ματιά
Μπεντονίτης νατρίου με περιεκτικότητα σε καουτσούκ
Ομαλή
πλαστικό
20 x 15 mm
Έως 340 % σε κανονικό νερό (pH 7)
έως 160 % σε υγρά που προσβάλλουν έντονα το σκυρόδεμα
έως 140 % σε αλκαλικά υγρά
Όχι
Ja
Όχι
Ja
Πιστοποιητικό δοκιμής της Γενικής Οικοδομικής Αρχής (abP)
MFPA Leipzig
Αριθμός: P-SAC 02 / 5.1 / 12-057
Ευρωπαϊκή Τεχνική Αξιολόγηση
ETA - 16 / 0735
με ημερομηνία 13 Σεπτεμβρίου 2017
Ja
Κατηγορία χρήσης A για κατηγορίες φορτίου 1 και 2 σύμφωνα με την οδηγία WU
Μπορεί να διατεθεί σε χώρους υγειονομικής ταφής ή σε εγκαταστάσεις αποτέφρωσης σύμφωνα με τους τοπικούς κανονισμούς διάθεσης αποβλήτων.
Installation with swelling tape adhesive:
The substrate must be clean, dry, and free of loose particles.
Apply the swelling tape adhesive in the centre of the joint in a uniform bead (width 8-10 mm) out of the cartridge onto the surface.
The subsequent concrete covering must be at least 8 cm on all sides.
Once the swelling tape adhesive has been applied in the centre of the joint, the MASTERSTOP bentonite swelling tape is placed on the adhesive and gently pressed on, moving it slightly back and forth, crosswise to the longitudinal axis.
When the tape is fixed, the adhesive should slightly ooze out on both sides.
This guarantees a complete fixation.
Ready for use after 4 – 6 hours (depending on weather conditions)
Installation with swelling tape grid:
The substrate must be clean, dry, and free of loose particles.
Place the MASTERSTOP bentonite swelling tape in the centre of the joint.
The subsequent concrete covering should be at least 8 cm on all sides.
Position the swelling tape correctly.
Push the fixing grid firmly onto the MASTERSTOP bentonite swelling tape.
Fasten using corresponding nails and either by hand or mechanically using a bolt-firing tool.
The distance between nails must not exceed 20 cm in the longitudinal direction of the swelling tape.
Both, straight and angle joints need to be butt jointed.
The joint areas must be form-fit in order to avoid any discontinuity in the system.
In the case of butt joints in the straight line and the use of swelling tape grids, the joints of swelling tape and swelling tape grid should be offset.
Status: 23.03.2022
Αξεσουάρ
κατάλληλα αξεσουάρ
Σφραγιστικό ενός συστατικού, χωρίς διαλύτες, για τη συγκόλληση των ταινιών διόγκωσης μπεντονίτη MASTERSTOP. Κατανάλωση: 40 - 50 m...
Επικοινωνήστε μαζί μας
Θα χαρούμε να απαντήσουμε στις ερωτήσεις σας