iz natrijevega bentonita
številka izdelka 010020
Opis izdelka
Bentonitni nabrekljivi trakovi MASTERSTOP so že leta preizkušeni v gradbeni praksi, ob stiku z vodo nabreknejo ter varno in trajno zatesnijo razpoke ali gradbene spoje.
Preizkusi zagotavljajo, da je izdelek primeren za različna področja uporabe.
- Lahka in varna namestitev
- Brez oblikovanih delov in zvarov
- Ni stojal
- Proces nabrekanja in krčenja je reverzibilen
- Učinek samovbrizgavanja Dimenzijsko stabilen in nelepljiv
- Napihljivi trakovi prodirajo v razpoke in votline
- Ni odpadkov ali preostalih kosov
- Okolju prijazno
- Varen zaradi obsežnega testiranja
Najpomembnejše informacije na prvi pogled
Natrijev bentonit z vsebnostjo kavčuka
Gladko
plastik
20 x 15 mm
Do 340 % v običajni vodi (pH 7)
do 160 % v tekočinah, ki močno napadajo beton
do 140 % v alkalnih tekočinah
Ne
Ja
Ne
Ja
Potrdilo o preizkusu splošnega gradbenega organa (abP)
MFPA Leipzig
št.: P-SAC 02 / 5.1 / 12-057
Evropska tehnična ocena
ETA - 16 / 0735
z dne 13. septembra 2017
Ja
Uporaba razreda A za razred obremenitve 1 in 2 v skladu s smernicami WU
Lahko se odstrani na odlagališčih ali v sežigalnicah v skladu z lokalnimi predpisi o odstranjevanju odpadkov.
![](/Einbauanleitungen/WG1/Masterstop/19989/image-thumb__19989__textandimagecombi/Quellbandkleber,P20auftragen.276442af.jpg.pagespeed.ce.y6zSh5l9IL.jpg)
Installation with swelling tape adhesive:
The substrate must be clean, dry, and free of loose particles.
Apply the swelling tape adhesive in the centre of the joint in a uniform bead (width 8-10 mm) out of the cartridge onto the surface.
The subsequent concrete covering must be at least 8 cm on all sides.
![](/Einbauanleitungen/WG1/Masterstop/19991/image-thumb__19991__textandimagecombi/MASTERSTOP,P20in,P20KLeber,P20eindr,PC3,PBCcken.72e39493.jpg.pagespeed.ce.Ux6_OnHNAz.jpg)
Once the swelling tape adhesive has been applied in the centre of the joint, the MASTERSTOP bentonite swelling tape is placed on the adhesive and gently pressed on, moving it slightly back and forth, crosswise to the longitudinal axis.
When the tape is fixed, the adhesive should slightly ooze out on both sides.
This guarantees a complete fixation.
Ready for use after 4 – 6 hours (depending on weather conditions)
![](/Einbauanleitungen/WG1/Masterstop/19988/image-thumb__19988__textandimagecombi/Verleg.,P20MASTERSTOP.be4d5857.jpg.pagespeed.ce.dOpA4urUAu.jpg)
Installation with swelling tape grid:
The substrate must be clean, dry, and free of loose particles.
Place the MASTERSTOP bentonite swelling tape in the centre of the joint.
The subsequent concrete covering should be at least 8 cm on all sides.
![](/Einbauanleitungen/WG1/Masterstop/19990/image-thumb__19990__textandimagecombi/Nagel,P20in,P20Gitter.f1dd7850.jpg.pagespeed.ce.FQapYqeStC.jpg)
Position the swelling tape correctly.
Push the fixing grid firmly onto the MASTERSTOP bentonite swelling tape.
Fasten using corresponding nails and either by hand or mechanically using a bolt-firing tool.
The distance between nails must not exceed 20 cm in the longitudinal direction of the swelling tape.
![](/Einbauanleitungen/WG1/Masterstop/19993/image-thumb__19993__textandimagecombi/Ecke,P20MASTERSTOP,P20mit,P20Kleber.8c4470c4.png.pagespeed.ce.MKB21R0_8l.png)
Both, straight and angle joints need to be butt jointed.
The joint areas must be form-fit in order to avoid any discontinuity in the system.
![](/Einbauanleitungen/WG1/Masterstop/19992/image-thumb__19992__textandimagecombi/Gitter,P20auf,P20MASTERSTOP.2bec18f1.jpg.pagespeed.ce.z7K3mJsi_N.jpg)
In the case of butt joints in the straight line and the use of swelling tape grids, the joints of swelling tape and swelling tape grid should be offset.
Status: 23.03.2022
Dodatki
primerna dodatna oprema
Jednosestavinska tesnilna masa brez topil za lepljenje bentonitnih nabrekljivih trakov MASTERSTOP. Potrošnja: 40-50 ml/m ...
Pišite nam
Z veseljem bomo odgovorili na vaša vprašanja