sodyum bentonitten
makale numarası 010020
Ürün açıklaması
MASTERSTOP bentonit şişme bantları yıllardır inşaat uygulamalarında denenmiş ve test edilmiştir, su ile temas ettiğinde şişer ve çatlakları veya inşaat derzlerini güvenli ve kalıcı bir şekilde kapatır.
Testler, ürünün çeşitli uygulama alanları için uygun olmasını sağlar.
- Kolay ve güvenli kurulum
- Kalıplanmış parça ve kaynak yok
- Ayaklık yok
- Şişme ve büzülme süreci tersine çevrilebilir
- Kendi kendine enjekte etme etkisi Boyutsal olarak kararlı ve yapışkan değildir
- Şişen bantlar çatlaklara ve boşluklara nüfuz eder
- Atık veya artık parça yok
- Çevre dostu
- Kapsamlı testler sayesinde güvenli
Bir bakışta en önemli bilgiler
Kauçuk içerikli sodyum bentonit
Pürüzsüz
plastik
20 x 15 mm
Normal suda %340'a kadar (pH 7)
Betona güçlü şekilde saldıran sıvılarda %160'a kadar
Alkali sıvılarda %140'a kadar
Hayır
Ja
Hayır
Ja
Genel bina yetkilisi test sertifikası (abP)
MFPA Leipzig
No: P-SAC 02 / 5.1 / 12-057
Avrupa Teknik Değerlendirmesi
ETA - 16 / 0735
13 Eylül 2017 tarihli
Ja
WU kılavuzuna uygun olarak yük sınıfı 1 ve 2 için A sınıfını kullanın
Yerel atık bertaraf yönetmeliklerine uygun olarak düzenli depolama sahalarında veya yakma tesislerinde bertaraf edilebilir.
![](/Einbauanleitungen/WG1/Masterstop/19989/image-thumb__19989__textandimagecombi/Quellbandkleber,P20auftragen.276442af.jpg.pagespeed.ce.y6zSh5l9IL.jpg)
Installation with swelling tape adhesive:
The substrate must be clean, dry, and free of loose particles.
Apply the swelling tape adhesive in the centre of the joint in a uniform bead (width 8-10 mm) out of the cartridge onto the surface.
The subsequent concrete covering must be at least 8 cm on all sides.
![](/Einbauanleitungen/WG1/Masterstop/19991/image-thumb__19991__textandimagecombi/MASTERSTOP,P20in,P20KLeber,P20eindr,PC3,PBCcken.72e39493.jpg.pagespeed.ce.Ux6_OnHNAz.jpg)
Once the swelling tape adhesive has been applied in the centre of the joint, the MASTERSTOP bentonite swelling tape is placed on the adhesive and gently pressed on, moving it slightly back and forth, crosswise to the longitudinal axis.
When the tape is fixed, the adhesive should slightly ooze out on both sides.
This guarantees a complete fixation.
Ready for use after 4 – 6 hours (depending on weather conditions)
![](/Einbauanleitungen/WG1/Masterstop/19988/image-thumb__19988__textandimagecombi/Verleg.,P20MASTERSTOP.be4d5857.jpg.pagespeed.ce.dOpA4urUAu.jpg)
Installation with swelling tape grid:
The substrate must be clean, dry, and free of loose particles.
Place the MASTERSTOP bentonite swelling tape in the centre of the joint.
The subsequent concrete covering should be at least 8 cm on all sides.
![](/Einbauanleitungen/WG1/Masterstop/19990/image-thumb__19990__textandimagecombi/Nagel,P20in,P20Gitter.f1dd7850.jpg.pagespeed.ce.FQapYqeStC.jpg)
Position the swelling tape correctly.
Push the fixing grid firmly onto the MASTERSTOP bentonite swelling tape.
Fasten using corresponding nails and either by hand or mechanically using a bolt-firing tool.
The distance between nails must not exceed 20 cm in the longitudinal direction of the swelling tape.
![](/Einbauanleitungen/WG1/Masterstop/19993/image-thumb__19993__textandimagecombi/Ecke,P20MASTERSTOP,P20mit,P20Kleber.8c4470c4.png.pagespeed.ce.MKB21R0_8l.png)
Both, straight and angle joints need to be butt jointed.
The joint areas must be form-fit in order to avoid any discontinuity in the system.
![](/Einbauanleitungen/WG1/Masterstop/19992/image-thumb__19992__textandimagecombi/Gitter,P20auf,P20MASTERSTOP.2bec18f1.jpg.pagespeed.ce.z7K3mJsi_N.jpg)
In the case of butt joints in the straight line and the use of swelling tape grids, the joints of swelling tape and swelling tape grid should be offset.
Status: 23.03.2022
Aksesuarlar
uygun aksesuarlar
MASTERSTOP bentonit şişen bantların yapıştırılması için tek bileşenli, solventsiz dolgu macunu. Tüketim: 40 - 50 ml/m ...
Bize ulaşın
Sorularınızı yanıtlamaktan mutluluk duyarız