Πλήρης επικάλυψη και στις δύο πλευρές
αριθμός άρθρου 070432
Πλήρης επικάλυψη και στις δύο πλευρές
Φύλλο σφράγισης, πλάτους 160 mm
Μήκος στοιχείου 2,0 m
Συσκευασία 50 στοιχείων
Συμπεριλαμβανομένων 55 σφιγκτήρων
Πιστοποιητικό δοκιμής της επιθεώρησης κτιρίων MFPA Leipzig
Ουδέτερα υπόγεια ύδατα
Οι πιο σημαντικές πληροφορίες με μια ματιά
St 37, γαλβανισμένο
Ειδική επίστρωση: πολυμερές πλαστικό ενισχυμένο με ύφασμα
2.0 m
160 mm
Περίπου 0,6 mm
Περίπου 0,15 mm
Περίπου 0,9 mm
Πιστοποιητικό δοκιμής γενικής οικοδομικής αρχής (AbP)
MFPA Leipzig
Ja
Κατηγορία χρήσης A για κατηγορίες φορτίου 1 και 2 σύμφωνα με την οδηγία WU
Όχι
Ja
Ξύλινο κουτί (210 x 30 x 25 cm)
50 τεμάχια λωρίδες
55 τεμάχια σφιγκτήρες
12 κουτιά ανά παλέτα
Τα φύλλα που έχουν ήδη τοποθετηθεί στο πρώτο τμήμα σκυροδέτησης μπορούν να εκτεθούν σε ελεύθερη υπεριώδη ακτινοβολία για 4 εβδομάδες το πολύ μέχρι την πλήρη τοποθέτησή τους στο σκυρόδεμα. Εάν οι εργασίες κατασκευής διακοπούν για μεγαλύτερο χρονικό διάστημα, τα φύλλα πρέπει να προστατεύονται ειδικά από την υπεριώδη ακτινοβολία (σκουρόχρωμες μεμβράνες κ.λπ. ...) ώστε να μην υποβαθμιστεί η χρηστικότητά τους.
![](/Einbauanleitungen/WG2/Dichtblech%20VB%20und%2080/20393/image-thumb__20393__textandimagecombi/Schutzfolie,P20abziehen.6842dcb7.jpg.pagespeed.ce.niVMD8DHZB.jpg)
Remove the bottom half of the parted protective foil from the special coating.
![](/Einbauanleitungen/WG2/Dichtblech%20VB%20und%2080/20018/image-thumb__20018__textandimagecombi/mittig,P20mit,P20Befestigungsb,PC3,PBCgel.2befed6b.png.pagespeed.ce.MA8S_6nlE9.png)
Place the VB joint sheet metal in the centre of the rising wall on top of the upper reinforcement layer.
Push the mounting brackets with a maximum distance of 70 cm over the sheet metal and fix them to the upper reinforcement layer with binding wire.
The embedment depth in the concrete must be at least 3 cm and must not be more than half the height of the sheet metal.
![](/Einbauanleitungen/WG2/Dichtblech%20VB%20und%2080/20019/image-thumb__20019__textandimagecombi/Ecke1.0f4ec1b5.jpg.pagespeed.ce.6gAbHIfb29.jpg)
The VB joint sheet metal must overlap by at least 6 cm in the area of the joint, in the straight sections and also in the corner area.
![](/Einbauanleitungen/WG2/Dichtblech%20VB%20und%2080/20020/image-thumb__20020__textandimagecombi/Ecke2.d7d0831b.jpg.pagespeed.ce.456Lo43HXR.jpg)
To do so, the upper protective foil must be turned back in the area subsequently to be joined.
![](/Einbauanleitungen/WG2/Dichtblech%20VB%20und%2080/20021/image-thumb__20021__textandimagecombi/Ecke3.ef301b61.jpg.pagespeed.ce.yn0XuzBFgP.jpg)
Overlap the VB joint sheet metal by at least 6 cm and press the two ends firmly together.
The joint must be glued over its full height and entire surface to prevent subsequent water permeation.
There must be no contamination on the adhesive surfaces that could interfere with bonding.
![](/Einbauanleitungen/WG2/Dichtblech%20VB%20und%2080/20022/image-thumb__20022__textandimagecombi/Ecke4.4ce19ce1.jpg.pagespeed.ce.W5TIMkPa25.jpg)
Secure the joint with one of the fixing clips provided and fold the protective foil back onto the special coating.
![](/Einbauanleitungen/WG2/Dichtblech%20VB%20und%2080/20023/image-thumb__20023__textandimagecombi/vorbereitete,P20Stoesse.4231242f.jpg.pagespeed.ce.iU3Soqr5gA.jpg)
Prepared joints in the straight sections as well as the corner area.
Once the foundation slab has been concreted, and before the wall formwork is closed or the double wall elements have been set up, the remaining protective foil must be removed.
The concreting of the wall base and corresponding preparations must be carried out in accordance with the established technical standards.
Status: 23.03.2022
Αξεσουάρ
κατάλληλα αξεσουάρ
Η σύνδεση ταινίας αρμού στεγανοποιητικού φύλλου είναι ένας απλός, γρήγορος και ασφαλής τρόπος σύνδεσης του στεγανοποιητικού φύλλου...
Προκατασκευασμένο γωνιακό στοιχείο 90° ...
Για τη στερέωση των αρμών επικάλυψης των επικαλυμμένων μεταλλικών υδατοφρακτών ...
Βαθμός στερέωσης για μεταλλικούς υδατοφράκτες ύψους έως 160 mm ...
Παρόμοια προϊόντα
Μπορείτε να βρείτε παρόμοια προϊόντα εδώ.
Το φύλλο στεγανοποίησης με ράγα συγκράτησης για τη στεγανοποίηση κατασκευαστικών αρμών Κατά τη σφράγιση κατασκευαστικών αρμών απ...
Η σφράγιση των αρμών κατασκευής σκυροδέματος θέτει υψηλές απαιτήσεις στην τεχνολογία σφράγισης. Τα πλήρως επικαλυμμένα φύλλα στεγα...
Επικοινωνήστε μαζί μας
Θα χαρούμε να απαντήσουμε στις ερωτήσεις σας