Popolnoma prevlečen na obeh straneh
številka izdelka 070432
VB fugirna pločevina v trakovih
V celoti prevlečeno na obeh straneh
Tesnilna pločevina, širine 160 mm
Dolžina elementa 2,0 m
Pakiranje 50 elementov
vključno s 55 sponkami za spenjanje
Potrdilo o preizkusu gradbenega inšpektorata MFPA Leipzig
Nevtralen za podtalnico
Najpomembnejše informacije na prvi pogled
St 37, pocinkano
Posebna prevleka: polimerna plastika, ojačana s tkanino
2,0 m
160 mm
Okoli 0,6 mm
Okoli 0,15 mm
Okoli 0,9 mm
Potrdilo o preizkusu splošnega gradbenega organa (AbP)
MFPA Leipzig
Ja
Uporaba razreda A za razred obremenitve 1 in 2 v skladu s smernicami WU
Ne
Ja
Drevesna škatla (210 x 30 x 25 cm)
50 kosov trakov
55 kosov sponk
12 škatel na paleti
Plošče, ki so že vgrajene v prvi betonski del, so lahko izpostavljene prostemu UV-vremenskemu vplivu največ 4 tedne, dokler niso popolnoma vgrajene v beton. Če so gradbena dela prekinjena za daljše obdobje, je treba plošče posebej zaščititi pred UV-žarki (temne folije itd. ...), da se ne poslabša njihova uporabnost.
Remove the bottom half of the parted protective foil from the special coating.
Place the VB joint sheet metal in the centre of the rising wall on top of the upper reinforcement layer.
Push the mounting brackets with a maximum distance of 70 cm over the sheet metal and fix them to the upper reinforcement layer with binding wire.
The embedment depth in the concrete must be at least 3 cm and must not be more than half the height of the sheet metal.
The VB joint sheet metal must overlap by at least 6 cm in the area of the joint, in the straight sections and also in the corner area.
To do so, the upper protective foil must be turned back in the area subsequently to be joined.
Overlap the VB joint sheet metal by at least 6 cm and press the two ends firmly together.
The joint must be glued over its full height and entire surface to prevent subsequent water permeation.
There must be no contamination on the adhesive surfaces that could interfere with bonding.
Secure the joint with one of the fixing clips provided and fold the protective foil back onto the special coating.
Prepared joints in the straight sections as well as the corner area.
Once the foundation slab has been concreted, and before the wall formwork is closed or the double wall elements have been set up, the remaining protective foil must be removed.
The concreting of the wall base and corresponding preparations must be carried out in accordance with the established technical standards.
Status: 23.03.2022
Dodatki
primerna dodatna oprema
Priključek za spojni trak tesnilne folije je preprost, hiter in varen način za vodotesno povezavo tesnilne folije VB ali tesnilne ...
Prefabriciran vogalni element 90° ...
Za zavarovanje prekrivnih spojev prevlečenih kovinskih vodnih zapor ...
Priključni nosilec za kovinske vodne zaporke do višine 160 mm ...
Podobni izdelki
Podobne izdelke lahko najdete tukaj.
Tesnilna pločevina s pritrdilno tirnico za tesnjenje gradbenih stikov Pri tesnjenju betonskih gradbenih stikov se postavljajo vi...
Tesnjenje betonskih gradbenih stikov postavlja visoke zahteve glede tehnologije tesnjenja. Popolnoma prevlečene tesnilne plošče Te...
Pišite nam
Z veseljem bomo odgovorili na vaša vprašanja