Pilnībā pārklāts no abām pusēm
raksta numurs 070432
VB savienojuma loksne sloksnēs
Pilnībā pārklāts no abām pusēm
Blīvējuma loksne, 160 mm plata
Elementa garums 2,0 m
Iepakojumā 50 elementi
komplektā ar 55 skavām
Būvniecības inspekcijas pārbaudes sertifikāts MFPA Leipciga
Neitrāls gruntsūdeņiem
Pievienot paziņojumu sarakstamSvarīgākā informācija īsumā
St 37, cinkots
Īpašais pārklājums: ar audumu pastiprināta polimēra plastmasa
2,0 m
160 mm
Apmēram 0,6 mm
Apmēram 0,15 mm
Apmēram 0,9 mm
Vispārējā būvvaldes testa sertifikāts (AbP)
MFPA Leipciga
Ja
Izmantojiet A klasi 1. un 2. slodzes klasei saskaņā ar WU vadlīnijām
Nē
Ja
Darba koka kaste (210 x 30 x 25 cm)
50 gab. sloksnes
55 gab. skavas
12 kastes uz paletes
Loksnes, kas jau ir uzstādītas pirmajā betonēšanas posmā, var pakļaut brīvai UV starojuma iedarbībai ne ilgāk kā 4 nedēļas, līdz tās ir pilnībā iebetonētas. Ja būvdarbi tiek pārtraukti uz ilgāku laiku, loksnes ir īpaši jāaizsargā pret UV stariem (tumšas plēves utt. ...), lai nepasliktinātu to lietošanas īpašības.
![](/Einbauanleitungen/WG2/Dichtblech%20VB%20und%2080/20393/image-thumb__20393__textandimagecombi/Schutzfolie,P20abziehen.6842dcb7.jpg.pagespeed.ce.niVMD8DHZB.jpg)
Remove the bottom half of the parted protective foil from the special coating.
![](/Einbauanleitungen/WG2/Dichtblech%20VB%20und%2080/20018/image-thumb__20018__textandimagecombi/mittig,P20mit,P20Befestigungsb,PC3,PBCgel.2befed6b.png.pagespeed.ce.MA8S_6nlE9.png)
Place the VB joint sheet metal in the centre of the rising wall on top of the upper reinforcement layer.
Push the mounting brackets with a maximum distance of 70 cm over the sheet metal and fix them to the upper reinforcement layer with binding wire.
The embedment depth in the concrete must be at least 3 cm and must not be more than half the height of the sheet metal.
![](/Einbauanleitungen/WG2/Dichtblech%20VB%20und%2080/20019/image-thumb__20019__textandimagecombi/Ecke1.0f4ec1b5.jpg.pagespeed.ce.6gAbHIfb29.jpg)
The VB joint sheet metal must overlap by at least 6 cm in the area of the joint, in the straight sections and also in the corner area.
![](/Einbauanleitungen/WG2/Dichtblech%20VB%20und%2080/20020/image-thumb__20020__textandimagecombi/Ecke2.d7d0831b.jpg.pagespeed.ce.456Lo43HXR.jpg)
To do so, the upper protective foil must be turned back in the area subsequently to be joined.
![](/Einbauanleitungen/WG2/Dichtblech%20VB%20und%2080/20021/image-thumb__20021__textandimagecombi/Ecke3.ef301b61.jpg.pagespeed.ce.yn0XuzBFgP.jpg)
Overlap the VB joint sheet metal by at least 6 cm and press the two ends firmly together.
The joint must be glued over its full height and entire surface to prevent subsequent water permeation.
There must be no contamination on the adhesive surfaces that could interfere with bonding.
![](/Einbauanleitungen/WG2/Dichtblech%20VB%20und%2080/20022/image-thumb__20022__textandimagecombi/Ecke4.4ce19ce1.jpg.pagespeed.ce.W5TIMkPa25.jpg)
Secure the joint with one of the fixing clips provided and fold the protective foil back onto the special coating.
![](/Einbauanleitungen/WG2/Dichtblech%20VB%20und%2080/20023/image-thumb__20023__textandimagecombi/vorbereitete,P20Stoesse.4231242f.jpg.pagespeed.ce.iU3Soqr5gA.jpg)
Prepared joints in the straight sections as well as the corner area.
Once the foundation slab has been concreted, and before the wall formwork is closed or the double wall elements have been set up, the remaining protective foil must be removed.
The concreting of the wall base and corresponding preparations must be carried out in accordance with the established technical standards.
Status: 23.03.2022
Aksesuāri
piemēroti piederumi
Slēgšanas loksnes savienojums ir vienkāršs, ātrs un drošs veids, kā ūdensnecaurlaidīgi savienot VB blīvējuma loksni vai MASTER blī...
Prefabrikāts 90° stūra elements ...
Pārklājuma šuvju nostiprināšanai metāla ūdens aizbīdņiem ar pārklājumu ...
Kronšteins metāla ūdens aizbīdņiem līdz 160 mm augstumam ...
Līdzīgi produkti
Līdzīgus produktus var atrast šeit.
Loksne ar fiksējošo sliedi konstrukciju šuvju blīvēšanai Blīvējot betona konstrukciju šuves, blīvēšanas tehnoloģijai tiek izvirz...
Betona konstrukciju šuvju blīvēšanai ir augstas prasības attiecībā uz blīvēšanas tehnoloģiju. Pilnībā pārklātās blīvējuma loksnes ...
Sazinieties ar mums
Mēs labprāt atbildēsim uz jūsu jautājumiem