Standard type (S); inst. dim. E 600 mm
article number 070295
width of joint sheet metal 160 mm
(installation height to be specified when ordering)
incl. two fixing clips
water pressure test
Add to notice listThe most important information at a glance
St 37, galvanized
special coating: polymer resin
fabric-reinforced
2.50 m
160 mm
510 - 600 mm
Test report MFPA Leipzig
yes
Utility class A for the wear classes 1 and
2 in accordance with the WU guideline
On disposable pallets, wrapped in foil
No
Yes
original packaging in a dry place out of
direct sunlight.
landfill sites, taking into account the
local waste disposal regulations.
The stopend panel joint sheet metal ABS is positioned between the lower and upper reinforcement layer (foundation – foundation area) or the outer and inner reinforcement layer (wall – wall area).
The perforated plate is fastened to the reinforcement using binding wire.
The individual elements can be pushed into one another, they must overlap by at least 7 cm and the joint must be secured with two fixing clips.
With higher constructional element thicknesses, the stopend panel joint sheet metal ABS must also be stiffened in order to be structurally load-bearing.
Before the segment is concreted, the protective foil must be removed from the joint sheet metal.
The protective foil in the section not to be concreted remains on the joint sheet metal.
Once the shuttering for the concrete segment is complete, the segment can be concreted.
The area around the stopend panel joint sheet metal ABS must be carefully waterproofed to ensure that the joint sheet metal is fully embedded in the concrete on all sides.
Cavities behind the perforated plate must be avoided.
In the second concrete segment, as soon as the protective foil has been removed immediately before concreting, concrete can be placed directly against the stopend panel joint sheet metal ABS.
In this case, the concrete must also be carefully waterproofed in the area of the stopend panel joint sheet metal ABS.
Shrink holes or reinforcement shadow must not form around the joint sheet metal.
The distance between the "installation dimension E" reinforcement is decisive when ordering the stopend panel joint sheet metal ABS
Status: 23.03.2022
Accessories
suitable accessories
width of perforated plate 600 mm ...
Similar products
You can find similar products here.
width of joint sheet metal 160 mm(installation height to be specified when ordering)incl. two fixing clips water pressure test sho...
Contact us
We are happy to answer your questions