Tip Standart (S)
makale numarası 070295
Kepenk elemanı kategorisi kaba bağlantı
Döngü veya inşaat derzlerini kapatırken, sızdırmazlık teknolojisine yüksek talepler getirilir.
Tamamen kaplanmış ABS kalıp elemanları, döngü veya betonlama derzlerinin presleme ve presleme dışı suya karşı güvenli ve kalıcı bir şekilde kapatılmasını sağlar.
Mümkün olan en iyi sonucu elde etmek için sipariş sırasında gerekli montaj yüksekliği belirtilmelidir.
Bildirim listesine ekleBir bakışta en önemli bilgiler
St 37, galvanizli
Özel kaplama: kumaş takviyeli polimer plastik
2,50 m
160 mm
510 - 600 mm
Avrupa Teknik Değerlendirmesi
Alman Yapı Teknolojisi Enstitüsü (DIBt), Berlin
Genel yapı denetim test sertifikası
MFPA Leipzig
ja
WU kılavuzuna göre yük sınıfı 1 ve 2 için A sınıfını kullanın
Tek kullanımlık paletlerde,
İki darbe kelepçesi/eleman dahil olmak üzere ayrı ayrı mevcuttur
Hayır
Ja
The stopend panel joint sheet metal ABS is positioned between the lower and upper reinforcement layer (foundation – foundation area) or the outer and inner reinforcement layer (wall – wall area).
The perforated plate is fastened to the reinforcement using binding wire.
The individual elements can be pushed into one another, they must overlap by at least 7 cm and the joint must be secured with two fixing clips.
With higher constructional element thicknesses, the stopend panel joint sheet metal ABS must also be stiffened in order to be structurally load-bearing.
Before the segment is concreted, the protective foil must be removed from the joint sheet metal.
The protective foil in the section not to be concreted remains on the joint sheet metal.
Once the shuttering for the concrete segment is complete, the segment can be concreted.
The area around the stopend panel joint sheet metal ABS must be carefully waterproofed to ensure that the joint sheet metal is fully embedded in the concrete on all sides.
Cavities behind the perforated plate must be avoided.
In the second concrete segment, as soon as the protective foil has been removed immediately before concreting, concrete can be placed directly against the stopend panel joint sheet metal ABS.
In this case, the concrete must also be carefully waterproofed in the area of the stopend panel joint sheet metal ABS.
Shrink holes or reinforcement shadow must not form around the joint sheet metal.
The distance between the "installation dimension E" reinforcement is decisive when ordering the stopend panel joint sheet metal ABS
Status: 23.03.2022
Aksesuarlar
uygun aksesuarlar
Delikli sac genişliği 600 mm ...
Benzer ürünler
Benzer ürünleri burada bulabilirsiniz.
Kepenk elemanı kategorisi kilitli bağlantı Döngü veya inşaat derzlerini kapatırken sızdırmazlık teknolojisine yüksek talepler geli...
Bize ulaşın
Sorularınızı yanıtlamaktan mutluluk duyarız