Tapón de cierre de plástico macizo
número de artículo 046160
Impermeabilización interior para espesores de pared de plástico y fibrocemento
Añadir a la lista de avisosLa información más importante de un vistazo
Elastómero termoplástico (TPE)
Para diámetro interior de 21,5 a 23 mm
ca. 70 ± 5 Shore A
Informe de ensayo
MFPA Leipzig
PB P 5.1/15-012
Prueba JGS
MPA Braunschweig
(1200/442/15c) - Pan
Por ejemplo, purines, estiércol líquido, filtraciones de ensilado, gas metano, radón, radiación ultravioleta, ozono, betún
250 piezas / cubo
No
Ja
Clase "E", según DIN-EN 13501-1
Required tooling:
Hard rubber mallet: 1500 - 2000 g
Cleaning brush for tube 21.5 - 26 mm ( Art.-Nr.: 046170)
Drive-in aid ( Art.-Nr.: 046180 )
Soiled distance tubes must be thoroughly cleaned before installing the STOPPER.
The entire installation area must be properly cleaned as otherwise it will not be possible to drive in the STOPPER to its final depth.
The STOPPER maxi can only be used as the outer closure of the distance tube if cones are used.
The STOPPER maxi is installed by driving it in with a hard rubber mallet (weight 1500 - 2000 g) using reasonable force.
The STOPPER maxi must be driven in to its full depth, i.e. flush with the concrete surface.
!! The STOPPERS must always be driven in at both ends of the distance tube !!
When driving in the second STOPPER maxi on the other end of the tube, it may appear that it is not possible to drive it in completely. This is due to compressed air trapped between the two STOPPERS.
If this situation occurs, simply wait and give the air time to escape before continuing to drive in the STOPPER into its final position.
Status: 23.03.2022
Accesorios
accesorios adecuados
Productos similares
Puede encontrar productos similares aquí.
Impermeabilización interior para espesores de pared de plástico y fibrocemento ...
Impermeabilización interior para espesores de pared de plástico y fibrocemento ...
Contacto
Estaremos encantados de responder a sus preguntas