Tapón de cierre de plástico macizo
número de artículo 046150
Impermeabilización interior para espesores de pared de plástico y fibrocemento
Añadir a la lista de avisosLa información más importante de un vistazo
Elastómero termoplástico (TPE)
Para diámetro interior de 21,5 a 23 mm
ca. 70 ± 5 Shore A
Informe de ensayo
MFPA Leipzig
PB P 5.1/15-012
Prueba JGS
MPA Braunschweig
(1200/442/15c) - Pan
Por ejemplo, purines, estiércol líquido, filtraciones de ensilado, gas metano, radón, radiación ultravioleta, ozono, betún
250 piezas / cubo
No
Ja
Clase "E", según DIN-EN 13501-1
Required tooling:
Hard rubber mallet: 1500 - 2000 g
Cleaning brush for tube 21.5 - 26 mm ( Art.-Nr.: 046170)
Drive-in aid ( Art.-Nr.: 046180)
Soiled distance tubes must be thoroughly cleaned before installing the STOPPER.
The entire installation area must be properly cleaned as otherwise it will not be possible to drive in the STOPPER to its final depth.
Whether using cones or lip seals, the STOPPER mini 22 can be used as the outer closure of the distance tube.
The STOPPER mini 22 is installed by driving it in with a hard rubber
mallet (weight 1500 - 2000 g) using reasonable force.
If a lip is used, the STOPPER mini 22 must be driven in so that it is flush.
The small surrounding edge of the STOPPER mini 22 must lie flat against the surface of the concrete.
!! The STOPPERS must always be driven in at both ends of the distance tubel!!
If used with a tapered cone, the last bit of the STOPPER mini 22 must be driven into position using a drive-in aid.
The STOPPER mini 22 is then driven in so far that the small surrounding edge is resting against the inner concrete surface.
!! The STOPPERS must always be driven in at both ends of the distance tubel!!
When driving in the second STOPPER mini 22 on the other end of the tube, it may appear that it is not possible to drive it in completely. This is due to compressed air trapped between the two STOPPERS.
If this situation occurs, simply wait and give the air time to escape before continuing to drive in the STOPPER into its final position.
Status: 23.03.2022
Accesorios
accesorios adecuados
Productos similares
Puede encontrar productos similares aquí.
Impermeabilización interior para espesores de pared de plástico y fibrocemento ...
Impermeabilización interior para espesores de pared de plástico y fibrocemento ...
Contacto
Estaremos encantados de responder a sus preguntas