Täysin päällystetty molemmilta puolilta pidätyskiskon kanssa
artikkelin numero 070200
Saumauslevy, jossa on kiinnityskisko, rakennusliitosten tiivistämiseen
Tiivistettäessä betonirakentamisen saumoja, tiivistystekniikalle asetetaan korkeat vaatimukset
Täyspinnoitetut MASTER-tiivistyslevyt kaistaleina varmistavat, että betonirakentamisen saumat tiivistetään tukevasti ja pysyvästi puristavaa ja ei-puristavaa vettä vastaan.
Tärkeimmät tiedot yhdellä silmäyksellä
St 37, sinkitty
vahva, tahmea
2,50 m
160 mm
Noin 0,7 mm
noin 2,5 mm
Yleinen rakennusvalvonnan koetodistus (AbP)
ja
Käyttöluokka A kuormitusluokkiin 1 ja 2 WU-ohjeen mukaisesti
Ei
Ja
Puinen laatikko (255 x 30 x 25 cm)
40 liuskaa
45 kpl puskurikiinnikkeitä
Saksa: enintään 2,0 bar (20 m:n vesipatsas, 2,5-kertainen varmuuskerroin huomioon ottaen).
![](/Einbauanleitungen/WG2/Master%20Dichtblech/20028/image-thumb__20028__textandimagecombi/Verpackung.dc85cc87.jpg.pagespeed.ce.VVZtbVn3_n.jpg)
The product is delivered in a wooden crate.
The MASTER joint sheet metal elements and the fixing clips are in the crate.
![](/Einbauanleitungen/WG2/Master%20Dichtblech/20031/image-thumb__20031__textandimagecombi/Bild,P201.60fb18e4.png.pagespeed.ce.cNkTMjUGN4.png)
Remove the lower protective film
![](/Einbauanleitungen/WG2/Master%20Dichtblech/20029/image-thumb__20029__textandimagecombi/Bild,P202.b26d7197.png.pagespeed.ce.7fqs-uLLID.png)
Place element on top of upper reinforcement layer
![](/Einbauanleitungen/WG2/Master%20Dichtblech/20032/image-thumb__20032__textandimagecombi/Bild,P203.89d9d8ad.png.pagespeed.ce.px--ATzyrh.png)
Place the MASTER joint sheet metal element in the centre of the rising wall on top of the upper reinforcement layer.
The embedment depth in the concrete must be at least 3 cm and must not be more than half the height of the sheet metal (8 cm).
Overlap MASTER joint sheet metal by 5 cm and press together
![](/Einbauanleitungen/WG2/Master%20Dichtblech/20030/image-thumb__20030__textandimagecombi/Bild,P204.6a4c2852.png.pagespeed.ce.iG4DRg0xOs.png)
Secure the joint with a fixing clip
![](/Einbauanleitungen/WG2/Master%20Dichtblech/20034/image-thumb__20034__textandimagecombi/Bild,P205.e7055bd8.jpg.pagespeed.ce.Dr2W7eT_OW.jpg)
Fix the element´s support rail using a tie wire.
Simply bend the element in the corner area.
If our MASTER joint sheet metal SFE adjustable is used, in the rising wall, the prefabricated MASTER joint sheet metal angle 90° must be used.
![](/Einbauanleitungen/WG2/Master%20Dichtblech/20033/image-thumb__20033__textandimagecombi/Bild,P206.904d8ce2.jpg.pagespeed.ce.Ycralpt2Bo.jpg)
The MASTER joint sheet metal elements can be bent in any way.
Waterproofing of staggerd levels is also possible without any problems
Once the foundation slab has been concreted, and before the wall formwork is closed or the double wall elements have been set up, the remaining protective foil must be removed.
The concreting of the wall base and corresponding preparations must be carried out in accordance with the established technical standards.
Status: 23.03.2022
Tarvikkeet
sopivat lisävarusteet
Elivalmistettu 90° kulmaelementti asennuskiskolla ...
Tiivistyslevyn liitosnauhaliitos on yksinkertainen, nopea ja turvallinen tapa liittää VB-tiivistyslevy tai MASTER-tiivistyslevy ve...
Profiili koostuu täysin päällystetystä metallisesta vesieristeestä, joka kiinnittyy vettä läpäisemättömällä tavalla tuoreeseen bet...
Profiili koostuu täysin päällystetystä metallisesta vesieristeestä, joka kiinnittyy vettä läpäisemättömällä tavalla tuoreeseen bet...
Samanlaisia tuotteita
Löydät samankaltaisia tuotteita täältä.
Betonirakenteiden saumojen tiivistäminen asettaa korkeat vaatimukset tiivistystekniikalle. Yksipuolisesti pinnoitetuilla tiivistys...
Ota yhteyttä
Vastaamme mielellämme kysymyksiisi