voor waterdichte verlijming onder druk
artikelnummer 040100
Solventvrije betonlijm op basis van epoxyhars
.PROTECT BK is een oplosmiddelvrije betonlijm voor waterondoorlatende verlijmingen - FC pluggen in FC wanddiktes - en voor force-fit verlijmingen van betondelen.
Toevoegen aan kennisgevingslijstDe belangrijkste informatie in één oogopslag
Epoxidharz
pasty
Dichtheid: ca. 1,90 g/cm³
ca. 1,9 kg/m²/mm laagdikte
+ 10 °C up to + 30 °C
Termperature of element minimum + 3 °C over dew point
Verwerkingstijd ( bij 50 % relatieve vochtigheid )
20 - 30 minuten ( 30 °C )
40 - 60 minuten ( 20 °C )
90 - 120 minuten (10 °C)
Uitharding (volledige mechanische belastbaarheid)
( bij 50 % rel. LF )
3 dagen ( 30 °C )
UB 5.1/13-568
7 bar (70 m waterkolom)
1 kg samengestelde bus
Component A 0.5 kg
Component B 0.5 kg
1 : 1 (naar gewicht)
Beton, waterdicht beton
Minimale leeftijd 18 dagen
Droog, antislip, stofvrij
vrij van afscheidende stoffen zoals vet, olie, enz.
Zee- en afvalwater
alkaliën
Verdunde zuren
Minerale oliën
Smeermiddelen en brandstoffen
Diverse oplosmiddelen
Verdere resistenties op aanvraag of via
onze bestendigheidslijst
ca. 75 - 80 N/mm² (voorwaarde 100% bevochtiging)
ca. 30 N/mm² (voorwaarde 100% bevochtiging)
best voor 12 maanden na productie
Processing/ Mixing:
Allow the hardener component ( component B ) to flow completely into the master component (component A ). Mix intensively with a slowly rotating stirrer (recommendation: double stirrer with counter-rotating stirrer shafts).
Repot into another receptacle and mix thoroughly again.
The compound must be homogeneous, streak-free before application.
Sealing of fibre cement distance tubes with fibre cement plugs:
After cleaning the inside of the fibre cement distance tubes and removing the loose material, the fibre cement plug is dipped into the PROTECT BK and inserted into the distance tube.
The quantity of PROTECT BK on the plug must be sufficient to ensure that the fibre cement plug is fully glued to the inside of the distance tube over its full length.
Depending on the requirements of the construction site, several fibre cement plugs may have to be installed.
Bonding of concrete components:
Depending on the application, PROTECT BK is evenly applied to the components to be bonded using a spatula, smoothing trowel, toothed trowel or similar.
Make sure that the entire surface is bonded without voids.
Immediately after applying the adhesive, the surfaces to be bonded are pressed together and weighted if necessary. For vertical or overhead bonding, the components must be fixed for at least 12 hours,
depending on temperature and layer thickness.
PROTECT BK can be applied in layer thicknesses of 1 - 20 mm.
Please note:
The relative humidity must not exceed 80 %.
Ensure good ventilation after application and during hardening.
Depending on the substance, concentration and duration of exposure, exposure to chemicals can lead to colour changes on the surface which, however, do not affect functionality.
When exposed to UV rays, epoxy resins generally show a certain colour change and chalking.
Status: 23.03.2022
Vergelijkbare producten
Je kunt soortgelijke producten hier vinden.
Inwendige afdichting voor wanddiktes van kunststof en vezelcement ...
Inwendige afdichting voor wanddiktes van kunststof en vezelcement ...
Inwendige afdichting voor wanddiktes van kunststof en vezelcement ...
Contact us
We beantwoorden graag je vragen