per l'incollaggio pressurizzato a tenuta d'acqua
numero di articolo 040100
Adesivo per calcestruzzo senza solventi a base di resina epossidica
.PROTECT BK è un adesivo per calcestruzzo privo di solventi per l'incollaggio impermeabile all'acqua - tasselli FC in spessori di parete FC - e per l'incollaggio a forza di parti in calcestruzzo.
Aggiungi all'elenco degli avvisiLe informazioni più importanti in un colpo d'occhio
Epoxidharz
gustoso
Densità: circa 1,90 g/cm³
circa 1,9 kg/m²/mm di spessore dello strato
+ 10 °C up to + 30 °C
Termperature of element minimum + 3 °C over dew point
Tempo di lavorazione ( al 50 % di umidità relativa )
20 - 30 minuti ( 30 °C )
40 - 60 minuti ( 20 °C )
90 - 120 minuti ( 10 °C )
Cura ( piena capacità di carico meccanico )
( al 50% di LF )
3 giorni ( 30 °C )
UB 5.1/13-568
7 bar ( 70 m di colonna d'acqua )
Lattina di composito da 1 kg
Componente A 0,5 kg
Componente B 0,5 kg
1 : 1 ( in peso )
Calcestruzzo, calcestruzzo impermeabile
Età minima 18 giorni
Asciutto, antiscivolo, senza polvere
libero da sostanze separanti come grasso, olio, ecc.
Acqua di mare e acque reflue
alcali
Acidi diluiti
Oli minerali
Lubrificanti e carburanti
Vari solventi
Ulteriori resistenze su richiesta o tramite
la nostra lista di resistenze
circa 75 - 80 N/mm² (prerequisito 100% di bagnatura)
circa 30 N/mm² (prerequisito 100% di bagnatura)
meglio entro 12 mesi dalla produzione
Processing/ Mixing:
Allow the hardener component ( component B ) to flow completely into the master component (component A ). Mix intensively with a slowly rotating stirrer (recommendation: double stirrer with counter-rotating stirrer shafts).
Repot into another receptacle and mix thoroughly again.
The compound must be homogeneous, streak-free before application.
Sealing of fibre cement distance tubes with fibre cement plugs:
After cleaning the inside of the fibre cement distance tubes and removing the loose material, the fibre cement plug is dipped into the PROTECT BK and inserted into the distance tube.
The quantity of PROTECT BK on the plug must be sufficient to ensure that the fibre cement plug is fully glued to the inside of the distance tube over its full length.
Depending on the requirements of the construction site, several fibre cement plugs may have to be installed.
Bonding of concrete components:
Depending on the application, PROTECT BK is evenly applied to the components to be bonded using a spatula, smoothing trowel, toothed trowel or similar.
Make sure that the entire surface is bonded without voids.
Immediately after applying the adhesive, the surfaces to be bonded are pressed together and weighted if necessary. For vertical or overhead bonding, the components must be fixed for at least 12 hours,
depending on temperature and layer thickness.
PROTECT BK can be applied in layer thicknesses of 1 - 20 mm.
Please note:
The relative humidity must not exceed 80 %.
Ensure good ventilation after application and during hardening.
Depending on the substance, concentration and duration of exposure, exposure to chemicals can lead to colour changes on the surface which, however, do not affect functionality.
When exposed to UV rays, epoxy resins generally show a certain colour change and chalking.
Status: 23.03.2022
Prodotti simili
Potete trovare prodotti simili qui.
Impermeabilizzazione interna per spessori di parete in plastica e fibrocemento ...
Impermeabilizzazione interna per spessori di muro in plastica e fibrocemento ...
Impermeabilizzazione interna per spessori di parete in plastica e fibrocemento ...
Contattateci
Siamo lieti di rispondere alle vostre domande