nyomás alatti vízzáró ragasztáshoz
cikkszám 040100
Epoxigyanta alapú, oldószermentes betonragasztó
.A PROTECT BK egy oldószermentes betonragasztó vízzáró ragasztáshoz - FC dübelek FC falvastagságban - és betonelemek kényszerillesztéséhez.
Hozzáadás a hirdetési listáhozA legfontosabb információk egy pillantásra
Epoxidharz
pasty
Sűrűség: kb. 1,90 g/cm³
kb. 1,9 kg/m²/mm rétegvastagság
+ 10 °C up to + 30 °C
Termperature of element minimum + 3 °C over dew point
Feldolgozási idő ( 50 % relatív páratartalom mellett )
20 - 30 perc ( 30 °C )
40 - 60 perc ( 20 °C )
90 - 120 perc ( 10 °C )
Keményedés ( teljes mechanikai terhelhetőség )
( 50 % rel. LF mellett )
3 nap ( 30 °C )
UB 5.1/13-568
7 bar ( 70m vízoszlop )
1 kg-os kompozit doboz
A komponens 0,5 kg
B komponens 0.5 kg
1 : 1 (tömeg szerint)
Beton, vízálló beton
Minimális életkor 18 nap
Száraz, csúszásmentes, pormentes
nem tartalmaz elválasztó anyagokat, mint például zsír, olaj stb.
Tengervíz és szennyvíz
lúgok
Hígított savak
Ásványi olajok
Kenőanyagok és üzemanyagok
Különböző oldószerek
További ellenállóképességek kérésre vagy
ellenállósági listánk
kb. 75-80 N/mm² (100%-os nedvesítés előfeltétele)
kb. 30 N/mm² (előfeltétel 100%-os nedvesedés)
legkorábban 12 hónappal a gyártás után
Processing/ Mixing:
Allow the hardener component ( component B ) to flow completely into the master component (component A ). Mix intensively with a slowly rotating stirrer (recommendation: double stirrer with counter-rotating stirrer shafts).
Repot into another receptacle and mix thoroughly again.
The compound must be homogeneous, streak-free before application.
Sealing of fibre cement distance tubes with fibre cement plugs:
After cleaning the inside of the fibre cement distance tubes and removing the loose material, the fibre cement plug is dipped into the PROTECT BK and inserted into the distance tube.
The quantity of PROTECT BK on the plug must be sufficient to ensure that the fibre cement plug is fully glued to the inside of the distance tube over its full length.
Depending on the requirements of the construction site, several fibre cement plugs may have to be installed.
Bonding of concrete components:
Depending on the application, PROTECT BK is evenly applied to the components to be bonded using a spatula, smoothing trowel, toothed trowel or similar.
Make sure that the entire surface is bonded without voids.
Immediately after applying the adhesive, the surfaces to be bonded are pressed together and weighted if necessary. For vertical or overhead bonding, the components must be fixed for at least 12 hours,
depending on temperature and layer thickness.
PROTECT BK can be applied in layer thicknesses of 1 - 20 mm.
Please note:
The relative humidity must not exceed 80 %.
Ensure good ventilation after application and during hardening.
Depending on the substance, concentration and duration of exposure, exposure to chemicals can lead to colour changes on the surface which, however, do not affect functionality.
When exposed to UV rays, epoxy resins generally show a certain colour change and chalking.
Status: 23.03.2022
Hasonló termékek
Hasonló termékeket itt talál.
Belső vízszigetelés műanyagból és szálcementből készült falvastagságokhoz ...
Belső vízszigetelés műanyagból és szálcementből készült falvastagságokhoz ...
Belső vízszigetelés műanyagból és szálcementből készült falvastagságokhoz ...
Kapcsolatfelvétel
Szívesen válaszolunk kérdéseire